Pinephone USB-C Docking Bar (Amazing !!)
#16
(03-02-2021, 06:54 PM)MariaTelos Wrote: Take a good look at both charging cable and dock, you'll notice that the charging cable has a longer plug. If you are having trouble connecting the dock, try doing so with the backplate removed. If you find that it now works perfectly, you may need a port extender like this: https://www.amazon.com/Extender-Cellular...B07MBWH7QG

Wonderful. When the backplate is on dmesg keeps repeating "power disabled" "cable inserted" over and over. Take the backplate off and dmesg shows "USB hub found" "4 Ports detected". In addition to this issue, my HDMI port was not centered in the hub cutout. I had to trim it to get a cable to go in.

I'm still not getting the screen to go to the tv, so maybe the HDMI is messed up inside the case. It's sitting at a bit of an angle inside the  hub. Thanks for the pointer, now I know why I wasn't getting anything at all.

Code:
[  865.869237] usb 1-1: new high-speed USB device number 5 using ehci-platform
[  866.029861] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[  866.038165] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  866.045431] usb 1-1: Product: USB2.0 HUB
[  866.053520] hub 1-1:1.0: USB hub found
[  866.057796] hub 1-1:1.0: 4 ports detected
[  866.461190] usb 1-1.1: new full-speed USB device number 6 using ehci-platform
[  866.679730] usb 1-1.1: New USB device found, idVendor=0639, idProduct=7210, bcdDevice=68.4d
[  866.691541] usb 1-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[  866.702367] usb 1-1.1: Product: Billboard
[  866.706423] usb 1-1.1: Manufacturer: Chrontel
[  866.714138] usb 1-1.1: SerialNumber: CH7210
[  867.049225] usb 1-1.2: new high-speed USB device number 7 using ehci-platform
[  867.269988] usb 1-1.2: New USB device found, idVendor=0fe6, idProduct=9900, bcdDevice=20.00
[  867.281820] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  867.292626] usb 1-1.2: Product: 10/100M LAN
[  867.296865] usb 1-1.2: Manufacturer: CoreChips
[  867.304428] usb 1-1.2: SerialNumber: 000000000AEA
[  867.339984] cdc_ether 1-1.2:2.0 eth0: register 'cdc_ether' at usb-1c1a000.usb-1.2, CDC Ethernet Device, 00:00:00:00:0a:ea
[  867.444525] cdc_ether 1-1.2:2.0 enx000000000aea: renamed from eth0
  Reply


Messages In This Thread
RE: Pinephone USB-C Docking Bar (Amazing !!) - by henrythemouse - 06-04-2021, 09:47 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  my pinephone melted norayr 6 826 04-04-2024, 07:22 PM
Last Post: Zebulon Walton
  Pinephone refusing to charge while suspended tiol 1 1,079 04-02-2024, 10:54 AM
Last Post: joH_N_Doe64
  various tricks to open the pinephone shengchieh 2 707 03-23-2024, 09:27 AM
Last Post: Ferriah
  pinephone can provide more than 500mA to a usb-c displayport device? unrznbl 2 337 03-21-2024, 08:52 AM
Last Post: unrznbl
  pinephone keyboard + dock question tuxcall 7 2,818 02-05-2024, 03:17 PM
Last Post: wigan
  Unsatisfactory GPS reception on PinePhone? LinAdmin2 53 55,759 12-17-2023, 11:42 AM
Last Post: robin.com.au
  PinePhone Pro not booting (Cap error!, pctl timeout) jealda 2 1,387 11-16-2023, 05:03 AM
Last Post: DrYak
  Pinephone frame damages Uturn 2 990 10-23-2023, 02:49 AM
Last Post: Uturn
  PinePhone Keyboard KJ6OHG 11 8,110 08-23-2023, 03:25 AM
Last Post: Kali
  PinePhone constantly vibrating and won't take charge ImmyChan 5 5,448 07-23-2023, 03:49 PM
Last Post: kb-zealot

Forum Jump:


Users browsing this thread: 2 Guest(s)