USB-C CC pins are pulled to the GND by AW3512 (VCONN switches) when VCONN is off
#27
(07-18-2020, 04:43 AM)jyc88 Wrote: Try using one of the recent pre-built Mobian images. I just compared fresh installs of a recent nightly build (20200715) I had against an older one (20200707). The older one didn't have anything in /sys/class/typec, but the more recent one did. I was able to use the more recent pre-built image to update the firmware. It looks like the current images should now include the anx7688 driver, so there should be fewer hoops to jump through to get USB peripherals working.

I also double checked whether pinephone-devtools was needed for it, and it looks like it isn't, so scratch that.

Tried the mobian images and still get "i2c read failed" and empty /sys/class/typec. I suspect I borked something while desoldering after all.

Thanks for help anywa.
  Reply


Messages In This Thread
RE: USB-C CC pins are pulled to the GND by AW3512 (VCONN switches) when VCONN is off - by oaklarch - 07-18-2020, 08:46 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  pine64 keyboard pogo 'no-go' pins --- 3 2,576 04-29-2022, 04:59 AM
Last Post: Humid Stylus
  PP v1.2 VCONN question m4xx3d0ut 0 845 03-18-2022, 12:26 PM
Last Post: m4xx3d0ut
  what are these pins above modem chip? zetabeta 1 1,643 12-13-2021, 04:38 AM
Last Post: kqlnut
  Pogo pins power clarification - reading schematics bokomaru 48 43,765 06-19-2021, 10:46 AM
Last Post: bokomaru
  Is the PinePhone only Pine-device with hardware switches? harrm 1 2,271 01-23-2021, 12:29 AM
Last Post: KC9UDX
  Where are the HW kill switches located? WaldoTheRanger 11 14,682 10-04-2020, 02:23 AM
Last Post: WaldoTheRanger
  Only enable modem when needed with kill switches sokolgeo 2 4,146 09-20-2020, 04:40 AM
Last Post: sokolgeo
  hardware switch wishlist/discussion - switches on the outside? mypine 7 7,525 04-12-2020, 10:40 AM
Last Post: wibble
  Kill switches blicken 2 3,882 02-08-2020, 03:51 PM
Last Post: wibble
  PInephone extra pins hnaguski 2 4,657 11-02-2019, 06:01 PM
Last Post: hnaguski

Forum Jump:


Users browsing this thread: 1 Guest(s)