Bravehart w/ ubports v 48 boot loop

[henkdieter]

I have just updated UBPorts on my Bravehear edition after about a week.
The battery was drained while the phone was powered off for a few dats, but it was in charge for about one or two minutes before update.
Update has finished, but I have received the same reboot loop.

I thought it has not enough power to boot up because the drained battery, so I pulled out my SDCard which has the OS and left it on charger for a while.
Then it was able to boot up.

However, it would be good to do something - so like an initial check at boot time then if the battery is low then just enable charging or wait while there is not enough charge.
...so a drained battery would not cause a boot loop...

 The battery being completely drained was indeed what caused the problem. I have the OS flased onto the emmc, so I had to insert a bootable sd card in order to have my pinephone charge.

dd being not very verbose about errors, made me think flasing an os onto the sd card went well, which was not true. I was trying to boot from an sd card that did not actually have an image flashed onto it. Which made me believe the phone was bricked.


Anyway, it works fine now! Just went back to the stable release channel (: .

Thanks for all your help!