Automatic partition resize did not work on an install I just did of 20201001 BTW.
- ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
- PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
- PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
1001 as updated to today, seems to be a problem w. MVNO data. I used nmcli to delete the connection I added using the GUI, then added a connection and up'ed it. Then cell data became a route (with poorer metric than Wifi, so that's OK). So... possibly problem with NetworkManager connections as added through GUI, and then a problem that the data connection was not up'ed, thus not used.
10-13-2020, 07:48 PM
(This post was last modified: 10-13-2020, 07:54 PM by bcnaz.)
Will MMS compatibility be added to Mobian at some point ?
I can survive just fine without that function,
... but I do have some unknown sender(s) that send those to my phone, and I must clear those or they eventually clog my modem.
Perhaps just a method to block or reject the MMS messages ?
Thanks
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
Mobile data is OK when I start up, but after resuming from CPU shutdown (CRUST etc.) no mobile data comes back:
mobian$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default _gateway 0.0.0.0 UG 600 0 0 wlan0
192.168.7.0 0.0.0.0 255.255.255.0 U 600 0 0 wlan0
mobian$ mmcli -m 0
error: couldn't find modem
mobian$ .do nmcli connection up RedPocket
Error: Connection activation failed: No suitable device found for this connection (device usb0 not available because profile is not compatible with device (mismatching interface name)).
mobian$
So data part of modem appears to not be brought back?
10-19-2020, 02:35 PM
(This post was last modified: 10-20-2020, 01:31 PM by bcnaz.)
October 19 Nightly Release :
Calls "work" if you toggle the 'Default/phone' setting (in sound settings) back and forth before each call... Yeah, not very practical.
> I Did the semi-auto software update after the 'notification' popped up, then no call functions worked, for me.
Testing on PMOS Convergent phone, with weak T-Mobile cell service.
(My Brave Heart phone using AT&T cell service, operates with only 'minor issues', still using Oct 05 nightly.)
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
10-22-2020, 02:41 AM
(This post was last modified: 10-22-2020, 03:21 AM by bcnaz.
Edit Reason: add more info
)
Oct 22 nightly release :
Phone : PMOS Convergence Edition, Mobian on micro sd card
Still need to toggle the 'default and phone' setting for phone calls, but they sound ok when you do get the calls to work.
SMS text works, no extra fiddling
Data works, surfing is better using my laptop via hot spot than using the onboard browser.
I am using my laptop to write this via my PMOS phone.
Nice to have the laptop 15.4" screen instead of the little phone screen.
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
I have installed Mobian on the SD card, and it's really good. I was a debian guy, and my dream was a debian based-phone. Not really anymore, but this Mobian really rocks! I think I'm going to put it on the EMMC