05-23-2020, 04:23 PM
(This post was last modified: 05-23-2020, 04:33 PM by dukla2000.
Edit Reason: update at 624
)
(05-23-2020, 03:52 PM)a-wai Wrote: ...
It can be generated using the following command:
Code:mkimage -T script -A arm64 -C none -n pinephone -d /boot/boot.cmd /boot/boot.scr
Thanks
With 600
Code:
$ ./mem.sh
17 tests completed with these patterns:
4c494e5558726c7a
eeeeeeeeeeeeeeee
dddddddddddddddd
bbbbbbbbbbbbbbbb
7777777777777777
cccccccccccccccc
9999999999999999
6666666666666666
3333333333333333
8888888888888888
4444444444444444
2222222222222222
1111111111111111
aaaaaaaaaaaaaaaa
5555555555555555
ffffffffffffffff
0000000000000000
Tested memory region 0x0000000040000000 to 0x00000000b7bfb000 (1915MB)
0x0000000040000000 - 0x0000000040080000 GOOD
0x000000004106f000 - 0x0000000049505000 GOOD
0x000000004950e080 - 0x0000000049511000 GOOD
0x000000004a000000 - 0x00000000b7bcd330 GOOD
0x00000000b7bcd361 - 0x00000000b7bcd368 GOOD
0x00000000b7bcd397 - 0x00000000b7bcd398 GOOD
0x00000000b7bfaffc - 0x00000000b7bfb000 GOOD
No errors found
Going to try 624
PS - no problems with 624. It runs for somewhere between 30 and 60 second during boot (extended period with white LED) which I guess is too short. Then again I am not sure if there is something intermittent on my phone! (Standard evasive guess when trying to debug and get something repeatable!!!). Just trying memtester on 1G at 624. then tomorrow will try memtest=256 or something.
- ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
- PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
- PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC