[Volunteer needed]Too high DRAM clock speed MAY be causing you random crashes/freezes

[dukla2000]

...
I couldn't get a log sample from a system with bad memory so the entire error handling section is made from reverse engineering of the Linux source code. If you have a kernel log from a system with bad memory I'd greatly appreciate if you could provide real error messages.

But how do I get memtest to execute on boot?

I added memtest=17 in /boot/boot.cmd

Code:

$ cat /boot/boot.cmd
if test ${mmc_bootdev} -eq 0 ; then
echo "Booting from SD";
setenv linux_mmcdev 0;
else
echo "Booting from eMMC";
setenv linux_mmcdev 2;
fi;

setenv bootargs console=ttyS0,115200 no_console_suspend panic=10 consoleblank=0 loglevel=7 root=/dev/mmcblk${linux_mmcdev}p1 ro splash memtest=17 plymouth.ignore-serial-consoles vt.global_cursor_default=0

...

but clearly that isn't what is being used at boot

Code:

$ uname -a
Linux DuklaPP 5.6-pinephone #5.6.0+pinephone6 SMP PREEMPT Fri May 15 23:20:03 CEST 2020 aarch64 GNU/Linux
chris@DuklaPP:~$ grep -i memtest /boot/config-$(uname -r)
CONFIG_MEMTEST=y
chris@DuklaPP:~$ ./mem.sh
No memtest output found in kernel log, wrong boot option?
$ dmesg | grep Kernel
[    0.000000] Kernel command line: console=ttyS0,115200 no_console_suspend panic=10 consoleblank=0 loglevel=7 root=/dev/mmcblk2p1 ro splash plymouth.ignore-serial-consoles vt.global_cursor_default=0
...