05-13-2020, 03:53 PM
(This post was last modified: 05-13-2020, 04:54 PM by dukla2000.
Edit Reason: add 7-ZIP result
)
OK - still testing 624 but so far no problems.
To try get some reading on the speed I have run tinymembench (v0.4.9) at each step, starting from the 'stock' setting (whatever that was, presumably close to 552 based on the results.) In all cases CPU governor was set to performance, and tinymembench was aborted after the standard memcpy/standard memset results (as otherwise it runs for too long.) The exception to this (aborting) is at 624 it ran to completion fine.
Results (all numbers MB/s to nearest round number):
PS - have run sbc-bench to complete as well at 624. Apart from tinymembench the 7-Zip benchmark probably hits memory reasonably hard: results at stock memory speed 2964,2955,2961. Results at 624 3077, 3074, 3082.
To try get some reading on the speed I have run tinymembench (v0.4.9) at each step, starting from the 'stock' setting (whatever that was, presumably close to 552 based on the results.) In all cases CPU governor was set to performance, and tinymembench was aborted after the standard memcpy/standard memset results (as otherwise it runs for too long.) The exception to this (aborting) is at 624 it ran to completion fine.
Results (all numbers MB/s to nearest round number):
PHP Code:
Mem speed memcpy memset
stock 1078 3729
552 1074 3716
588 1121 3849
600 1135 3930
612 1160 3972
624 1182 4006
PS - have run sbc-bench to complete as well at 624. Apart from tinymembench the 7-Zip benchmark probably hits memory reasonably hard: results at stock memory speed 2964,2955,2961. Results at 624 3077, 3074, 3082.
- ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
- PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
- PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC