How to get started ? Share you development setup!
#11
I was thinking about hooking mine up to a Raspberry PIs GPIO pins, and compiling on my desktop, and doing the upload/download/monitoring over the network.

I have an unrelated question though. When these go into production will we still be able to hack on them like we are now? I would love to keep doing dev on my watch even if my design isn't where the community puts its weight behind
  Reply
#12
(11-03-2019, 09:56 AM)Hikari_Tadashi Wrote: I was thinking about hooking mine up to a Raspberry PIs GPIO pins, and compiling on my desktop, and doing the upload/download/monitoring over the network.

I have an unrelated question though. When these go into production will we still be able to hack on them like we are now? I would love to keep doing dev on my watch even if my design isn't where the community puts its weight behind

This depending on developer decision and assume still able to hack "wirelessly". However, if you hack a sealed PineTime and broke the update, this means you brick the device and becomes paper weight.
  Reply
#13
I found this one on Twitter : https://twitter.com/MisterTechBlog/statu...5342935040

[Image: EI754SiVAAInhhM?format=jpg&name=4096x4096]

PineTime in a box Smile
  Reply
#14
https://sites.google.com/brian-beattie.c...m/pinetime
  Reply
#15
I get a 404 error on that URL.
  Reply
#16
Here is my setup. ^_^
have verified everything, so will glue it together soon.[Image: a47d4f9a0e66d820072232a2f6728930.jpg][Image: 5198ce79d7b4cd78a5752b354f5f6d1e.jpg][Image: 4e751a18651d38c9d959fbe4098f3027.jpg][Image: 02b7b1baa0720bf718b33b60893a7c47.jpg][Image: 6ecbeb57b47d9be14446a2843d119f32.jpg][Image: 17a716a126792dccf2e2b540433eb1b8.jpg]

Sent from my SM-G960F using Tapatalk

Some assembly images[Image: 2c2668ead29110f2b1e5fdb34e0f07e8.jpg][Image: 2f13090eb8a9129ae2a65b8cadf48886.jpg][Image: ae35d4f004ecf2eca251e5fea356239e.jpg][Image: 289d4229e2baaf0144f7d702a86ecaab.jpg][Image: 8cd1a92e84b0bb75b83b3b969d37ce73.jpg][Image: 313bde235782cc8101cd6916eb462666.jpg]

Sent from my SM-G960F using Tapatalk
  Reply
#17
Hi @ayke 

It seems I have pretty much bought the same solution to connect the PineTime as you have. J-Link EDU mini, SWD breakout board, ...

Would you mind to post which cabel from the PineTime debug connectors connects wich which connector on the SWDbreakout board. Most are clear, but I am missing where to connect the 3.3V power for example.

Also, which software/ commands did you use in this setup to access the PineTime?
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)