PCIE SATA controller ASM1062 problems or software

[vecnar]

Hello Nikolay,
Congratulations on getting your item and that it is working without any problems!

I haven't had any problems with mine since the last time and the only way i can reproduce it is by moving pcie card slightly to one side today. It wasn't the case the last time as the card bracket was screwed hard and no movements bar sd card change which applies a slight pressure on the board but as it is screwed in to metal case it shouldn't made any difference.

You need to ensure your release uses the kernel with these two workarounds available and you have set the parameters in /boot/extlinux/extlinux.conf.

I really want to try to reproduce with new sata card consistently first. I do not know how to apply any changes to kernel and I would like to find out if my current kernel has those patches or not. How do i verify it, according to this post by hackerb9 ?

Code:

apt source linux
looked for some added lines with plus from https://github.com/nuumio/linux-kernel/commit/5a65b17686002dc84d461bffa324a2cb68e67aee
# searched for "pcie_rk_bus_scan_delay=" but couldn't find
nano /linux-4.9.168/Documentation/kernel-parameters.txt
#searched for "bus_scan_delay" but no entries found
nano /linux-4.9.168/drivers/pci/host/pcie-rockchip.c

I tried the above steps but not sure if it downloaded the correct version. I tried to do the same on armbian but on first step it gave me error "You must put some 'source' URIs in your sources.list". I tried to uncomment dsc from /etc/apt/sources.list and run apt-get update and apt source linux it downloaded source but i couldn't find any /drivers/pci/host directory. Any advice on how else i can identify kernel has this fix or not?