06-02-2019, 06:39 PM
(06-02-2019, 01:39 PM)Nikolay_Po Wrote: The black have better heatsink.
As for o-rings, if they deattached on both sides it means the trace which was connected to o-ring is broken. You may look around the missed o-rings and find disconnected trace. In such cases I'm scratching the coating of the trace and trying to make the trace copper clean from coating closer to the pin but keep the coating at surrounding ground and another traces. When broken trace is scratched and is clear, I'm soldering a thinnest wire from a strand right over the trace and the pin. This way the trace become connected to it's pin even if o-ring is absent.
I ordered black one but it is from france so not sure how long it will take them to deliver.
I looked at trace but it is too small for me to see anything, with my double vision now it makes it even worse. And as i remember cleaning it some were detaching and i was just soldering them back in so i am not sure which ones do not have good connection. I will leave it until new one arrives but i will try debug logging and update you when i receive the card.
I think software raid is part of omv functionality, i definitely didn't have raid setup as these were new drives.
Thanks a lot for all the help so far!