Individual SOPINE Power On After Shutdown?
On the clusterboard v2.2 the reset button won't restart shutdown SOPINE modules - they stay off with a dim PL7 green light. Any suggestions to restart individual SOPINEs? 

I'm leaning toward shorting the VCC and GND on the jumper pins beside each SOPINE. I could rig each set of jumpers with a toggle switch. Any suggestions on the best way to do this without harming my SOPINEs?
Maybe I'm not understanding you right, but typically shorting VCC directly to GND in any environment is a bad idea.

I would also like to know if there is a way to power on individual SOPINEs after they've been shutdown. As you mention, shorting pin 4 (RESET) to ground does not trigger a power-on, although it does force-reboot a running SOPINE. I've tried pin 5, which is labeled PWR_ON, but neither shorting it to ground nor VCC seem to have any effect. Unless I'm just doing it wrong...
PWR_ON to GND works for me, but it needs to be held low for a few seconds.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Selling Clusterboard + 4 sopine xblack86 7 4,890 09-26-2022, 03:09 AM
Last Post: poVoq
  SOPine modules stay off at reboot? PeterKeuning 32 31,743 08-17-2021, 11:11 AM
Last Post: renze
  sopine socket power problem cgiraldo 1 3,002 06-17-2020, 02:10 PM
Last Post: cgiraldo
  Network problems (actually bad power supply) Unkn0wn 14 15,848 12-01-2019, 10:02 AM
Last Post: venix1
  Power Switch AZClusterboard 1 2,596 02-16-2019, 06:55 AM
Last Post: mdmbc
  How much force does it take to insert a SOPINE module? jbobspants 0 1,744 01-17-2019, 12:15 PM
Last Post: jbobspants
  Compiling on the Sopine Cluster khaosgrille 3 4,947 08-10-2018, 06:17 AM
Last Post: khaosgrille
  Kubernetes on SoPine cluster part.1 maya.b 3 7,289 04-18-2018, 08:31 AM
Last Post: PigLover
  Question on the power resistors bergera 2 3,742 02-15-2018, 08:20 AM
Last Post: bergera
  sopine cluster thermal images maya.b 4 6,096 12-29-2017, 02:51 PM
Last Post: Luke

Forum Jump:

Users browsing this thread: 1 Guest(s)