11-03-2018, 08:33 PM
(11-03-2018, 08:18 PM)evilbunny Wrote:(11-03-2018, 08:08 PM)Trash_Can_Man Wrote: Ok, what do i need to edit or what command to send to choose a specific uuid and set it permanently? or its not needed if there are no other drive with valid info to boot from? lets say i only have those 2 mentioned hdd, one with a bootable image and the other without, uboot is smart enough to not give errors and use the one actually bootable on every try?
Unless a partition is named the same as your boot/root partition you shouldn't have issues, I'd use UUID as a last resort as there is a few files to change to use it.
Keep in mind that you are talking with an advanced user only, no expert by any meter...so it can be selected by partition name, but where do i set it? do i need to label any boot partition i want as "boot" or "root" or where to chose wich to use? (i ask all this because afaik sda1/sda2 can change depending what device answer faster at boot time (wich in this case id asume the ssd is going to answer faster than the hdd but i would like to be sure))