(11-20-2018, 09:10 PM)tuxd3v Wrote:(11-20-2018, 08:00 PM)Drago Wrote:Code:Nov 20 20:58:51 DietPi ats[17503]: getConditions: Warning, Values { THERMAL0_CTL, THERMAL1_CTL, FAN_CTL }: /sys/class/thermal/thermal_zone0/temp, /sys/class/
thermal/thermal_zone1/temp, ERROR
Thanks,
Yup, You need to update your kernel..that version doesn't get exported to SysFs the needed controls..
I don't know if you have access to this Kernels, but try it:
Then, reboot,Code:apt-get update
apt-get install linux-image-4.4.138-1097-rockchip-ayufan-gb5128c0a1684 linux-headers-4.4.138-1097-rockchip-ayufan-gb5128c0a1684 linux-firmware-image-4.4.138-1097-rockchip-ayufan-gb5128c0a1684
reboot
After reboot it should start automatically..
Will updating the kernel mess with my DietPi install?
Nevermind, I was able to update the kernel and it works now! Thanks for your help!
Here's the output from test:
Code:
Stopping for[ seconds ]............... 10
CPU Temperature[ max 70 °C ].......... 60
GPU Temperature[ max 70 °C ].......... 60
Fan PWM Duty Cycle value[ 0 - 255 ]... 190
--------------------
Running for[ seconds ]................ 10
CPU Temperature[ max 70 °C ].......... 42
GPU Temperature[ max 70 °C ].......... 41
Fan PWM Duty Cycle value[ 0 - 255 ]... 62
--------------------
Stopping for[ seconds ]............... 90
CPU Temperature[ max 70 °C ].......... 42
GPU Temperature[ max 70 °C ].......... 41
Fan PWM Duty Cycle value[ 0 - 255 ]... 0
--------------------
And the service running:
Code:
ats.service - ATS - Active Thermal Service
Loaded: loaded (/lib/systemd/system/ats.service; enabled; vendor preset: enab
led)
Active: active (running) since Tue 2018-11-20 22:31:04 EST; 5s ago
Main PID: 2593 (lua)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/ats.service
\u2514\u25002593 lua /usr/local/sbin/ats
Nov 20 22:31:04 DietPi systemd[1]: Started ATS - Active Thermal Service.
The fan is kind of loud actually, any advice on damping the sound?