[Archived] Initial Linux release from ayufan (0.6.XX)

[pfeerick]

Do these cheap adaptors work at 1500000 baud, is that the correct speed?

Yeah, 1.5M or 1500000 is the correct speed. My USB to serial console cables (ch341 based) work fine, but do seem a bit more temperamental with the rockpro64 output, so it looks like it might be pushing some slightly off-spec output at times when booting.

Also, with regards to the partition layout, that sounds correct. When booting directly from the SD card, the card needs to be laid out in format in order for it to be able to find what it needs to start booting.

Code:

Device          Start      End  Sectors  Size Type
/dev/mmcblk0p1     64     8063     8000  3.9M Linux filesystem
/dev/mmcblk0p2   8064     8191      128   64K Linux filesystem
/dev/mmcblk0p3   8192    16383     8192    4M Linux filesystem
/dev/mmcblk0p4  16384    24575     8192    4M Linux filesystem
/dev/mmcblk0p5  24576    32767     8192    4M Linux filesystem
/dev/mmcblk0p6  32768   262143   229376  112M Microsoft basic data
/dev/mmcblk0p7 262144 31225822 30963679 14.8G Linux filesystem

Code:

Number  Start (sector)    End (sector)  Size       Code  Name
   1              64            8063   3.9 MiB     8300  loader1
   2            8064            8191   64.0 KiB    8300  reserved1
   3            8192           16383   4.0 MiB     8300  reserved2
   4           16384           24575   4.0 MiB     8300  loader2
   5           24576           32767   4.0 MiB     8300  atf
   6           32768          262143   112.0 MiB   0700  boot
   7          262144        31225822   14.8 GiB    8300  root