zwave module not available
#1
Hi, 

I'm using the pine64_openhab_20160915_8GB.img image with the zwave module and adapter for the PI2 GPIO header but it seems as if the zwave module is not detected. The module should turn up as /dev/ttyS2 but from syslog all I get is:

Sep 24 07:57:58 openhab kernel: [    8.285353] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI

And then in openhab.log:

Code:
2016-10-01 14:25:21.389 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Connecting to serial port '/dev/ttyS2'
2016-10-01 14:25:21.485 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Serial port is initialized
2016-10-01 14:25:21.504 [INFO ] [mmandclass.ZWaveSecurityCommandClass] - Update networkKey
2016-10-01 14:25:21.532 [INFO ] [ve.internal.protocol.ZWaveController] - Starting ZWave controller
2016-10-01 14:25:21.534 [INFO ] [ve.internal.protocol.ZWaveController] - ZWave timeout is set to 5000ms. Soft reset is false.
2016-10-01 14:25:21.990 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Stopped ZWave serial handler
2016-10-01 14:25:21.998 [WARN ] [mon.registry.AbstractManagedProvider] - Could not update element with key zwave:serial_zstick:board in ManagedThingProvider, because it does not exists.
2016-10-01 14:25:22.001 [WARN ] [.core.thing.binding.BaseThingHandler] - Error while applying configuration changes: 'IllegalStateException: Could not update thing zwave:serial_zstick:board. Most likely because it is read-only.' - reverting configuration changes on thing 'zwave:serial_zstick:board'.


Any ideas on what could be wrong?

/Eric
  Reply
#2
(10-01-2016, 08:28 AM)eric Wrote: Hi, 

I'm using the pine64_openhab_20160915_8GB.img image with the zwave module and adapter for the PI2 GPIO header but it seems as if the zwave module is not detected. The module should turn up as /dev/ttyS2 but from syslog all I get is:

Sep 24 07:57:58 openhab kernel: [    8.285353] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI

And then in openhab.log:

2016-10-01 14:25:21.389 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Connecting to serial port '/dev/ttyS2'
2016-10-01 14:25:21.485 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Serial port is initialized
2016-10-01 14:25:21.504 [INFO ] [mmandclass.ZWaveSecurityCommandClass] - Update networkKey
2016-10-01 14:25:21.532 [INFO ] [ve.internal.protocol.ZWaveController] - Starting ZWave controller
2016-10-01 14:25:21.534 [INFO ] [ve.internal.protocol.ZWaveController] - ZWave timeout is set to 5000ms. Soft reset is false.
2016-10-01 14:25:21.990 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Stopped ZWave serial handler
2016-10-01 14:25:21.998 [WARN ] [mon.registry.AbstractManagedProvider] - Could not update element with key zwaveConfusederial_zstick:board in ManagedThingProvider, because it does not exists.
2016-10-01 14:25:22.001 [WARN ] [.core.thing.binding.BaseThingHandler] - Error while applying configuration changes: 'IllegalStateException: Could not update thing zwaveConfusederial_zstick:board. Most likely because it is read-only.' - reverting configuration changes on thing 'zwaveConfusederial_zstick:board'.

Any ideas on what could be wrong?

/Eric

Try running as sudo  (root)
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
  Reply
#3
Thanks, but I already tried that and it's not a permission problem. Compiled openzwave and the issue persists so I may have a faulty zwave module. Time to pull out the old scope. Smile
  Reply
#4
(10-04-2016, 11:52 AM)eric Wrote: Thanks, but I already tried that and it's not a permission problem. Compiled openzwave and the issue persists so I may have a faulty zwave module. Time to pull out the old scope. Smile

Did you find anything out? I believe I might have a faulty module as well. It worked for a while, but halfway through pairing my devices it just quit.
  Reply
#5
What was the verdict here? All I know about mine is that it's listed as "offline" when I pull it up in the recent OpenHab image. Trying to create my own thing hasn't helped.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Configuring WiFi Module via SSH Chadilac 2 6,667 11-16-2016, 09:11 AM
Last Post: Armbian User
  OpenHAB And Zwave FrenchFrog 12 22,838 09-13-2016, 11:17 PM
Last Post: bonterra

Forum Jump:


Users browsing this thread: 1 Guest(s)