SOQuartz Getting a working build
#1
Hello,
I recently started evaluating the SOQuartz to use as a replacement for the Pi CM4 but am struggling to get any working version of linux. I was able to run the debian installer from this but after completing set up I get this read out bellow:

Code:
U-Boot SPL board init
U-Boot SPL 2017.09-ga1f6fc00a0-210413 #ldq (Apr 13 2021 - 11:35:00)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
No misc partition
spl: partition error
Trying to boot from MMC1
MMC error: The cmd index is 0, ret is -110
mmc_init: -110, time 5
spl: mmc init failed with error: -110
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
# Reset the board to bootrom #


Has anyone gotten their SOQuartz to work?
  Reply
#2
Use this, this should help you, it will boot off emmc or sd card: https://www.t95plus.com/forums/downloads...-io.img.gz

I made this from various other sources to work with the super6c carrier board. Its running well, I have a four node ceph cluster running with nvme.

See this thread for a little more info. https://github.com/adamfowleruk/deskpi-super6c/issues/2

SSH in, username root, password 1234.
  Reply
#3
Armbian Ubuntu Jammy with kernel 5.19.7

https://www.t95plus.com/forums/downloads...9.7.img.gz

A better image, IMHO that the one I shared above. This is a regular Balbes150 image for the Quartz A but with a working uboot and a changed DTB.

Burn the image to SD/EMMC

Boot up you module, give it a couple of minutes to resize sdcard/emmc and then find its IP

Log in via SSH root/1234 and it will take you through the armbian first boot process.
  Reply
#4
Just to clarify something: This is NOT regarding the "Model A Base board" they sell for the Soquartz, right?

https://pine64.com/product/soquartz-model-a-baseboard/ <-- this is the one I purchased. 

Whereas you guys are using the Raspberry Pi CM4 IO Board, correct?
  Reply
#5
(09-07-2022, 06:53 AM)digitaldaz Wrote: Armbian Ubuntu Jammy with kernel 5.19.7

https://www.t95plus.com/forums/downloads...9.7.img.gz

A better image, IMHO that the one I shared above. This is a regular Balbes150 image for the Quartz A but with a working uboot and a changed DTB.

Burn the image to SD/EMMC

Boot up you module, give it a couple of minutes to resize sdcard/emmc and then find its IP

Log in via SSH root/1234 and it will take you through the armbian first boot process.

Can you tell me how to modify the dtb for this?
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ov5647 camera attached via csi to Quartz64 /Soquartz Randomuser 0 355 07-21-2022, 01:08 PM
Last Post: Randomuser
  BUILD CUSTOM SDK shaggy013 25 9,269 07-20-2022, 07:37 AM
Last Post: shaggy013
  Using soquartz's MIPI DSI1 output axelm 1 706 05-28-2022, 07:48 AM
Last Post: CounterPillow
  PCIe not working on custom board (soquartz) dferrg 1 868 02-23-2022, 04:31 AM
Last Post: dferrg
  Debian Userland on top of existing Linux build? dieselnutjob 3 1,636 01-25-2022, 01:12 PM
Last Post: dieselnutjob

Forum Jump:


Users browsing this thread: 1 Guest(s)