|
Actual voltages, amperage
|
06-19-2016, 06:10 AM
I just measured the 2.5A supply that came with me Pine and it's looking good so far. It seems to have a slightly higher low load/idle voltage of 5.2V which goes down to 5.1V when the system is booted and running Mate Desktop. If I use the Wifi, BT and both USB ports and run all four cores at full load the voltage at the micro-USB socket drops to 4.9V which is ok considering the cable is rather long...
Come have a chat in the Pine IRC channel >>
|
| Messages In This Thread |
|
Actual voltages, amperage - by NexusDude - 06-17-2016, 03:12 PM
RE: Actual voltages, amperage - by pfeerick - 06-18-2016, 03:47 AM
RE: Actual voltages, amperage - by MarkHaysHarris777 - 06-18-2016, 09:05 AM
RE: Actual voltages, amperage - by pfeerick - 06-18-2016, 07:06 PM
RE: Actual voltages, amperage - by g_t_j - 06-19-2016, 03:56 AM
RE: Actual voltages, amperage - by NexusDude - 06-18-2016, 07:32 PM
RE: Actual voltages, amperage - by MarkHaysHarris777 - 06-18-2016, 07:34 PM
RE: Actual voltages, amperage - by StefanB - 10-15-2016, 02:21 PM
RE: Actual voltages, amperage - by MarkHaysHarris777 - 10-15-2016, 05:22 PM
RE: Actual voltages, amperage - by pfeerick - 06-18-2016, 09:10 PM
RE: Actual voltages, amperage - by MarkHaysHarris777 - 06-19-2016, 04:43 AM
RE: Actual voltages, amperage - by g_t_j - 06-19-2016, 04:45 AM
RE: Actual voltages, amperage - by xalius - 06-19-2016, 06:10 AM
RE: Actual voltages, amperage - by janeku - 06-27-2016, 11:07 PM
|
