Provide power in via Pi-2 header
#14
(12-29-2016, 07:11 AM)BenCranston Wrote:
(12-29-2016, 06:09 AM)ciclopez Wrote: I've found why some people say it's possible to feed power via Pi-2 and some say it's not. There is a jumper (J9) to bypass the MT3608 power regulator, but only in the Pine A64+ 2GB version, at least in the Rev C. So yes, it's possible in A64+ 2GB Rev C (maybe also in previous revs), but it's not possible in any other version, at least for the moment.

[Image: Captura_de_pantalla_2016_12_29_a_la_s_13_16_23.png]

So are you suggesting that back power via the Pi-2 interface is possible if you remove both jumpers?  I have the board you are pointing out.  My jumpers are, according to the manual, jumped to DC 5V setting.  With the board jumpered as shown the MT3608 over heats and the board shuts down if you provide power input via the Pi-2.  Power input via the Euler DC IN pins works just fine.

As far as the schematic is correct, if you remove the jumper it won't work. If your jumper is in DC 5V position (pins 1&2 connected, pins 3&4 disconnected) back powering should work, as VCC-5V becomes the same line as DCIN, and should be the same as providing power through the microUSB port or DCIN pins in the Euler Bus.
I have the A64 512Mb version so I can't test this right now. I will ask to a friend that has de 2Gb version to test it and let you know.
  Reply


Messages In This Thread
Provide power in via Pi-2 header - by BenCranston - 06-13-2016, 07:55 PM
RE: Provide power in via Pi-2 header - by g_t_j - 06-14-2016, 06:14 AM
RE: Provide power in via Pi-2 header - by g_t_j - 06-15-2016, 05:17 AM
RE: Provide power in via Pi-2 header - by ciclopez - 12-29-2016, 07:54 AM
RE: Provide power in via Pi-2 header - by g_t_j - 03-08-2017, 02:23 PM
RE: Provide power in via Pi-2 header - by g_t_j - 03-08-2017, 03:03 PM
RE: Provide power in via Pi-2 header - by g_t_j - 03-08-2017, 04:26 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Which Power Supply Unit for Pine64 A64 DB V1.1 2GB REV B (year 2016)? databaseprogrammer 1 535 07-03-2021, 01:29 AM
Last Post: tllim
Lightbulb Alternate Power DC-IN on the Euler Bus also with PI filter for batt operation MarkHaysHarris777 13 15,381 12-19-2020, 09:53 PM
Last Post: evilpete
  Once Again: Power Supply problems I guess (Pine A64+ locking up) marcelser 0 2,092 06-04-2018, 03:11 PM
Last Post: marcelser
  Power supply problems. larsen8989 5 4,393 05-03-2018, 09:01 PM
Last Post: tllim
  solar power on a Pine64 tablet Little_Johnny 11 7,692 03-20-2018, 12:01 AM
Last Post: pfeerick
  Power up HDDs c4tich 3 3,035 03-18-2017, 09:18 AM
Last Post: Luke
  any danger from using 2 power sources at same time? dkryder 3 3,381 01-20-2017, 10:45 PM
Last Post: MarkHaysHarris777
Lightbulb A Tale of Two Power Supplies - why good is good and better is best MarkHaysHarris777 9 10,257 01-07-2017, 11:59 PM
Last Post: aegrotatio
  First cable for Euler Bus power done! AVL2016 24 16,189 10-05-2016, 06:43 AM
Last Post: Ghost
  Fuse in the AC power line? cr2016 3 3,414 10-02-2016, 04:35 AM
Last Post: pfeerick

Forum Jump:


Users browsing this thread: 2 Guest(s)