Nodes not booting

[User 18962]

When booting from SD, how does the emmc show up?

I assumed it would be /dev/mmcblk1 as the SD seems to be /dev/mmcblk0 and USB disks show up as /dev/sda, but I can't seem to find that on my Sopine connected to slot 0.

Edit: with the lsblk command it looks like the 128gb emmc is not recognized at all on my Armbian focal system when booting from SD. Normally I would have assumed only 64gb is supported, but since you have it working, it would be interesting to hear any suggestions. I used the emmc usb adapter to format it as a blank ext4 disk.

Edit2: Using the USB adapter the emmc on a USB2 port gets recognized as /dev/sda1, but for actual speed improvement I need to use the emmc slot next to module 0 I would guess.

Hola, sorry for the long wait time for a response. lifes been crazy. hopefully this helps, should be more active now.
here is the output for my first node:

Code:

here is the output for my first node:james@pine1:~$ lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
mtdblock0     31:0    0    16M  0 disk
mmcblk0      179:0    0  14.9G  0 disk
└─mmcblk0p1  179:1    0  14.7G  0 part /
mmcblk2      179:32   0 116.5G  0 disk /data
mmcblk2boot0 179:64   0     4M  1 disk
mmcblk2boot1 179:96   0     4M  1 disk
zram0        252:0    0    50M  0 disk /var/log
zram1        252:1    0 962.9M  0 disk [SWAP]