USB Tethering

[dukla2000]

...
On the pinephone, the gadget device is present when running `ip a`.

Is there anything else I can try / check to debug this issue?

On my phone, after I have plugged it into anything I have

Code:

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 6e:5e:ab:da:0d:5e brd ff:ff:ff:ff:ff:ff permaddr 02:ba:27:38:4f:69
3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether a2:3d:b0:20:50:72 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.2/8 brd 10.255.255.255 scope global noprefixroute usb0
       valid_lft forever preferred_lft forever
    inet6 fe80::67a8:4afd:c24c:a76b/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
4: wwan0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1358 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/none
    inet 10.71.124.196/29 brd 10.71.124.199 scope global noprefixroute wwan0
       valid_lft forever preferred_lft forever

and can of course ssh to mobian@10.0.0.2 just fine as well.