sopine socket power problem

I power up my clusterboard with the pine64 power supply (15A).

The clusterboard leds of socket #0 and #1 lights up, but sockets #3 to #6 does not turn on.

I was able to access sopine boards connected in any socket with a USB-Ethernet dongle through SSH.

I use the sopine armbian-focal img and sopine armbian-bionic images, with a modified dtb file to include 'allwinner,tx-delay-ps = <500>;' following:

With this modification I was able to see eth0 device with ifconfig next to my usb-dongle, but only if I connect the Sopine Board on socket #0 or #1. In the rest of the sockets the SOPINE led is on, but not the corresponding clusterboad led and the eth0 device is not listed (only my usb-dongle).

I think my clusterboard is malfunctioning.

I will try with an ATX power supply in the following days.

Any clue what could be wrong?

Also even if I have eth0 interfaces up with a correct ip in socket #0 and #1, they can not ping each other through the internal switch.
Same behavior powering the clusterboard through an ATX power supply ...

Possibly Related Threads…
Thread Author Replies Views Last Post
  Selling Clusterboard + 4 sopine xblack86 7 5,627 09-26-2022, 03:09 AM
Last Post: poVoq
  SOPine modules stay off at reboot? PeterKeuning 32 35,101 08-17-2021, 11:11 AM
Last Post: renze
  Network problems (actually bad power supply) Unkn0wn 14 17,061 12-01-2019, 10:02 AM
Last Post: venix1
  Power Switch AZClusterboard 1 2,780 02-16-2019, 06:55 AM
Last Post: mdmbc
  Individual SOPINE Power On After Shutdown? Pine 2 3,755 01-30-2019, 08:04 AM
Last Post: mdmbc
  How much force does it take to insert a SOPINE module? jbobspants 0 1,902 01-17-2019, 12:15 PM
Last Post: jbobspants
  Compiling on the Sopine Cluster khaosgrille 3 5,338 08-10-2018, 06:17 AM
Last Post: khaosgrille
  Kubernetes on SoPine cluster part.1 maya.b 3 7,671 04-18-2018, 08:31 AM
Last Post: PigLover
  Question on the power resistors bergera 2 4,013 02-15-2018, 08:20 AM
Last Post: bergera
  sopine cluster thermal images maya.b 4 6,613 12-29-2017, 02:51 PM
Last Post: Luke

Forum Jump:

Users browsing this thread: 1 Guest(s)