Hi
Just wanted to show you guys something interesting.
For the past days I was running Debian image from 2016-05-01 on my 1GB board and tonight I update the kernel to 3.10.101 with the pine64_update_kernel.sh script.
Then I noticed this on pi-monitor (thanks to tkaiser for that, I've been reading a lot of your stuff here and on other forums):
![[Image: pimonitor.JPG]](https://dl.dropboxusercontent.com/u/10787954/pimonitor.JPG)
That can't be just a coincidence
I guess it illustrates the efforts guys like Longsleep put on to make things better, so thank you very much !
by the way for people wondering what is my cooling setup, I have 2 heatsinks salvaged from an old motherboard and a fan right above. Before putting heatsink when running a stress test I was reaching 80 celcius and cooling stage 1, now It's stable at 57 celcius under full load.
![[Image: photo_2016-05-10_23-12-52.jpg]](https://dl.dropboxusercontent.com/u/10787954/photo_2016-05-10_23-12-52.jpg)
Not a lot of space between the heatsink and the fan but I had not found the heatsink yet when I built the enclosure, I though I was to use smaller heatsink like those cheap copper we see everywhere on ebay but these 2 are doing a great job. It may be a bit overkill but I like the results look and performance wise.
Just wanted to show you guys something interesting.
For the past days I was running Debian image from 2016-05-01 on my 1GB board and tonight I update the kernel to 3.10.101 with the pine64_update_kernel.sh script.
Then I noticed this on pi-monitor (thanks to tkaiser for that, I've been reading a lot of your stuff here and on other forums):
That can't be just a coincidence
I guess it illustrates the efforts guys like Longsleep put on to make things better, so thank you very much !
by the way for people wondering what is my cooling setup, I have 2 heatsinks salvaged from an old motherboard and a fan right above. Before putting heatsink when running a stress test I was reaching 80 celcius and cooling stage 1, now It's stable at 57 celcius under full load.
Not a lot of space between the heatsink and the fan but I had not found the heatsink yet when I built the enclosure, I though I was to use smaller heatsink like those cheap copper we see everywhere on ebay but these 2 are doing a great job. It may be a bit overkill but I like the results look and performance wise.