PINE64   ›   PINE A64(+)   ›   Pine A64 Hardware, Accessories and POT   ›   POT modules   ›   Rebooting loop

Rebooting loop
raz
Pine Initiate
**
Joined: Mar 2016
Posts: 2

Reputation: 0
#1
03-17-2016, 06:57 PM
I just received mine today. I tried 3 different images, used both mac and pc to write them on the microSD card. It keeps starting then rebooting at random intervals without actually getting to the OS. I am using an original Moto X gen 1 power cord. Could this reboot cycle be because of the power cord or memory card or just the board?
  Reply
tllim
Founder
*****
Moderators
Joined: Dec 2015
Posts: 4,362

Reputation: 294
#2
03-17-2016, 10:00 PM
(03-17-2016, 06:57 PM)raz Wrote: I just received mine today. I tried 3 different images, used both mac and pc to write them on the microSD card. It keeps starting then rebooting at random intervals without actually getting to the OS. I am using an original Moto X gen 1 power cord. Could this reboot cycle be because of the power cord or memory card or just the board?

Should be either power supply or power cord. From Motorola website, the power supply rating less than 2A.
  Website
  Reply
KryPtAlIvIaN
Moderator
*****
Moderators
Joined: Dec 2015
Posts: 170

Reputation: 13
#3
03-18-2016, 11:19 AM (This post was last modified: 03-18-2016, 11:19 AM by KryPtAlIvIaN.)
I had the same issue with Arch Linux yesterday. Turns out my ps3 controller that was connected, was drawing too much power. Soon as I disconnected the controller, booted right up.
  Reply
tllim
Founder
*****
Moderators
Joined: Dec 2015
Posts: 4,362

Reputation: 294
#4
03-18-2016, 11:36 AM
(03-18-2016, 11:19 AM)KryPtAlIvIaN Wrote: I had the same issue with Arch Linux yesterday. Turns out my ps3 controller that was connected, was drawing too much power. Soon as I disconnected the controller, booted right up.

My guess is your PS3 controller is in charge stage, this can draw quite some current.
  Website
  Reply
KryPtAlIvIaN
Moderator
*****
Moderators
Joined: Dec 2015
Posts: 170

Reputation: 13
#5
03-18-2016, 01:33 PM (This post was last modified: 03-18-2016, 01:35 PM by KryPtAlIvIaN.)
(03-18-2016, 11:36 AM)tllim Wrote:
(03-18-2016, 11:19 AM)KryPtAlIvIaN Wrote: I had the same issue with Arch Linux yesterday. Turns out my ps3 controller that was connected, was drawing too much power. Soon as I disconnected the controller, booted right up.

My guess is your PS3 controller is in charge stage, this can draw quite some current.

That's what I was thinking as well. 

After I disconnected the controller, the device booted fine. Honestly, I was shocked that it was so quick and responsive! I cannot wait to get my hands on something I'm more familiar with(Ubuntu).
  Reply
raz
Pine Initiate
**
Joined: Mar 2016
Posts: 2

Reputation: 0
#6
03-19-2016, 08:14 AM
KryPtAlIvIaN, what power supply are you using?
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)