07-25-2016, 06:04 AM
A while back I stumbled over this patch for u-boot https://patchwork.ozlabs.org/patch/602067/ forcing the RTL80211C/E PHY into master mode to overcome some issues when the PHY is in slave mode.
Maybe this could be a source for the random GbE problems we see here sometimes?
I was just looking at Olimex blog and read the specs for their A64 board, and one of the features reads:
I tried adding the register read-modify-write to the 3.10.x BSP driver but failed, maybe someone with better skills can have a look at it? The patch boils down to:
One read-modify-write operation....
Maybe this could be a source for the random GbE problems we see here sometimes?
I was just looking at Olimex blog and read the specs for their A64 board, and one of the features reads:
Code:
...
* Ethernet Gigabit interface works just in master mode
...I tried adding the register read-modify-write to the 3.10.x BSP driver but failed, maybe someone with better skills can have a look at it? The patch boils down to:
Code:
/* RTL8211x 1000BASE-T Control Register */
#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12);
#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11);
...
unsigned int reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
/* force manual master/slave configuration */
reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
/* force master mode */
reg |= MIIM_RTL8211X_CTRL1000T_MASTER;
phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
...One read-modify-write operation....
Come have a chat in the Pine IRC channel >>
