Not working

[Dayve]

I put the "pine64_openhab_20150521_8GB" image on my Pine64 2G today. It boots up to the login screen and I log in. I resized the partion and rebooted. I login again and can ssh in from my other computer.
The problem is that I can not see the Openhab server running at port 8080.
Would anyone know what my problem could be?

Thanks

[Luke]

I think that I would need to know a thing or two more before helping you out. When you type the ip followed by :8080 into your browser, what do you get ?
Should be as simple as finding the IP (which you obv have since you can ssh), typing it into a web browser followed by :8080.

If you cant get it to work come chat in IRC (see my sig) - will be quicker to sort it out.

[DonFL]

I struggled with the same thing until I had that "aha"moment.. (aka, that "DOH" moment), and entered IP and :8080 rather than http://openhab:8080 as the wiki mentions.

[Luke]

yup, hence I suggested "Should be as simple as finding the IP (which you obv have since you can ssh), typing it into a web browser followed by :8080"

Glad it worked

[DonFL]

yup, hence I suggested "Should be as simple as finding the IP (which you obv have since you can ssh), typing it into a web browser followed by :8080"

Glad it worked

Hopefully its the same for the OP.

I saw your post about 15 minutes after I figured it out, and was still banging my head on the table as I typed.

It would suggest to me that a wiki edit is in order...or at minimum, a clarification.

[Luke]

yup, hence I suggested "Should be as simple as finding the IP (which you obv have since you can ssh), typing it into a web browser followed by :8080"

Glad it worked

Hopefully its the same for the OP.

I saw your post about 15 minutes after I figured it out, and was still banging my head on the table as I typed.

It would suggest to me that a wiki edit is in order...or at minimum, a clarification.

Lenny got some nice tutorials up on his site - will ask if he is up for making one for OpenHAB -- perhaps you are right that it should be made even clearer.

[j.hoekstra]

To chime in on this, faced the same issue as the OP with OH2 not starting up. In my inpatience I rebooted the device before openhab was able to pull all necessities in and after that openhab didn't start up properly.
I rewrote the image and now let the image alone for a while for everything to settle and after that OH2 was up.
Might help someone else in the future