OMV 6 NAS - Image to use

[g_t_j]

Can someone be so kind to let me know what image should I use in order to install OMV 6.0 on top?

[evilbunny]

Can someone be so kind to let me know what image should I use in order to install OMV 6.0 on top?

Armbian and OMV have some sort of deal going from what I've read.

[g_t_j]

Can someone be so kind to let me know what image should I use in order to install OMV 6.0 on top?

Armbian and OMV have some sort of deal going from what I've read.

Ah it makes sense why I am having problems to install.
Any other OS which is recommended? (if possible a specific build that's been tested nad working without problems)

[evilbunny]

Can someone be so kind to let me know what image should I use in order to install OMV 6.0 on top?

Armbian and OMV have some sort of deal going from what I've read.

Ah it makes sense why I am having problems to install.
Any other OS which is recommended? (if possible a specific build that's been tested nad working without problems)

https://wiki.omv-extras.org/doku.php?id=...ian_buster

I'd use bullseye instead of buster but the install instructions are the same more or less...

[g_t_j]

Can someone be so kind to let me know what image should I use in order to install OMV 6.0 on top?

Armbian and OMV have some sort of deal going from what I've read.

Ah it makes sense why I am having problems to install.
Any other OS which is recommended? (if possible a specific build that's been tested nad working without problems)

https://wiki.omv-extras.org/doku.php?id=...ian_buster

I'd use bullseye instead of buster but the install instructions are the same more or less...

That's what I tried. I can't get OMV to install on top of Armbian.

[g_t_j]

I finally got it to work using image:
Armbian_20.11.6_Rockpro64_buster_current_5.9.14.img

I write the process here for future reference.

Installed the image into the eMMC module booted it up and had to issue the command:

Code:

echo 0 >  /sys/devices/platform/pwm-fan/hwmon/hwmon3/pwm1 

in order to stop the fan as it would run at full speed.

I then edited /etc/rc.local with nano ---->   

Code:

nano /etc/rc.local

 and added at the end of the file and before exit:

Code:

rmmod pwm-fan
echo 0 > /sys/class/pwm/pwmchip1/export
echo 110 > /sys/class/pwm/pwmchip1/pwm0/duty_cycle
echo 500 > /sys/class/pwm/pwmchip1/pwm0/period
echo 1 > /sys/class/pwm/pwmchip1/pwm0/enable

Now the fan runs constantly but at very low speed which I believe is the best compromise between cooling and silence.

After that I run armbian-config  and navigated > System > 3rd party software and installed OMV.

All good. Thanks for your help!