12-08-2020, 09:11 PM
Hey Guys,
Thanks for your help.
I got things working in the end.
It seemed to help when I used the following command to start the GPS.
AT+QGPS=1,255,1000,0,10
Also I think I may have had two programs listening on ttyUSB1 which may have meant each only was getting half the data (however I'm not sure of this).
Thanks again!
Thanks for your help.
I got things working in the end.
It seemed to help when I used the following command to start the GPS.
AT+QGPS=1,255,1000,0,10
Also I think I may have had two programs listening on ttyUSB1 which may have meant each only was getting half the data (however I'm not sure of this).
Thanks again!