No partitions are defined for mount

[rhuso]

Same here, though I mistakenly thought the battery was already connected to the phone and therefore hold at least a few seconds of a charge before switching wall outlets.

Would the OS just need to be re-flashed? My only concern is that I don't see how that might fix this partition issue.

Don't worry about the partitions. The new flash will fix it.

If you did break the installation here is a pretty good detailed video on how to re flash the Pinephone and start fresh.

https://www.youtube.com/watch?v=7HMkU43P9hw


It would be pretty hard to brick a Pinephone permanently. They're almost idiot proof. You let the screen go to sleep during the update. Don't let that happen. Read the blog here about that.

[/url]https://blog.mobian-project.org/posts/20...pam_issue/

You shouldn't use the latest image. They are broken. Use the installer image if you want an encrypted drive and update it as per the blog instructions I linked in the first post. This is the factory image that comes on the Mobian CE Edition. The encrypted installer image. Bottom one.gz

https://images.mobian-project.org/pinephone/installer/

If encryption isn't important to you and you want less updates to download. the latest image not broken is this one. Still run the updates in the blog. Choose the Feb-10th .gz

https://images.mobian-project.org/pinephone/nightly/

If you want to tweak or learn more about Mobian this is an excellent source.

[url=https://www.youtube.com/watch?v=7HMkU43P9hw]https://wiki.mobian-project.org/doku.php?id=start

Keep Mobian updated following the instructions in that blog probably every couple days because updates are rolling out quickly. It's getting very reliable.

If I helped you please rate +1. It helps make up for the lousy pay I get working here.

Just took delivery today, got the "Installation Failed" message with text: "Configuration Error No partitions are defined for mount to use.", and I'm here looking for answers. I pushed the "reset" button, followed the instructions again, and the same message appears. I'll follow the links here and hope.