01-16-2021, 07:36 AM
Hi!
I just received my Pinecil and wanted to update the firmware to IronOS v2.13 NL. Unfortunately this fails with:
dfu-util: Error during special command "MASS_ERASE" get_status
I'm using dfu-util 0.9-1 from Ubuntu 20.04; dfu-util -l shows
Found DFU: [28e9:0189] ver=0100, devnum=124, cfg=1, intf=0, path="1-6", alt=0, name="@Internal Flash /0x08000000/128*001Kg", serial="??"
so according to the https://wiki.pine64.org/wiki/Pinecil it should be safe to update the firmware.
I also tried updating the firmware with https://github.com/pine64/pinecil-firmware-updater/ on a Windows 10 machine but it fails with a similar message:
Invalid DFU suffix signature A valid DFU suffix signature will be required in a future dfu-util release!!! Error during special command "MASS_ERASE" get_status
DFU-Util exited with error code 74!
Flashing failed.
Any ideas what could be wrong here and how to update the firmware on this device?
See https://pastebin.com/wmRE10Bk for a complete log of dfu-util.
Thanks in advance.
I just received my Pinecil and wanted to update the firmware to IronOS v2.13 NL. Unfortunately this fails with:
dfu-util: Error during special command "MASS_ERASE" get_status
I'm using dfu-util 0.9-1 from Ubuntu 20.04; dfu-util -l shows
Found DFU: [28e9:0189] ver=0100, devnum=124, cfg=1, intf=0, path="1-6", alt=0, name="@Internal Flash /0x08000000/128*001Kg", serial="??"
so according to the https://wiki.pine64.org/wiki/Pinecil it should be safe to update the firmware.
I also tried updating the firmware with https://github.com/pine64/pinecil-firmware-updater/ on a Windows 10 machine but it fails with a similar message:
Invalid DFU suffix signature A valid DFU suffix signature will be required in a future dfu-util release!!! Error during special command "MASS_ERASE" get_status
DFU-Util exited with error code 74!
Flashing failed.
Any ideas what could be wrong here and how to update the firmware on this device?
See https://pastebin.com/wmRE10Bk for a complete log of dfu-util.
Thanks in advance.