Correct setup for u-boot and fstab ? Device not booting
@roel
I used ARM Trusted Firmware v2.4 and uBoot v2020.10 and the pine_h64_defconfig for my build since nothing else was available.
That surpised me was that the pine_h64_defconfig is only 16 lines of code, whilst rock64-rk3328_defconfig is 102 lines of code, which lead me to my conclusion that H64 is not supported by Mainline uBoot.
@kuleszdl
My stuff is based on your tutorial and works nicely on Rock64 so I thought I adapt further to get Debian running on H64.
Here is the output of uBoot:
I used ARM Trusted Firmware v2.4 and uBoot v2020.10 and the pine_h64_defconfig for my build since nothing else was available.
That surpised me was that the pine_h64_defconfig is only 16 lines of code, whilst rock64-rk3328_defconfig is 102 lines of code, which lead me to my conclusion that H64 is not supported by Mainline uBoot.
@kuleszdl
My stuff is based on your tutorial and works nicely on Rock64 so I thought I adapt further to get Debian running on H64.
Here is the output of uBoot:
Code:
U-Boot SPL 2020.10 (Nov 27 2020 - 13:45:46 +0000)
DRAM: 2048 MiB
Trying to boot from MMC2