Ethernet Issues on DietPi

[kissste]

I'm having the same problem with ETH0 as well as HDMI.

I believe, it's related to ATF is enabling regulators.

The fix is to downgrade ATF

https://github.com/armbian/build/commit/...d432b361cc

source:
https://forum.armbian.com/topic/12532-op...ment=91760

[    8.898813] dwmac-sun8i 5020000.ethernet: PTP uses main clock
[    9.011232] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0)
[    9.025089] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
[    9.032514] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
[    9.039841] dwmac-sun8i 5020000.ethernet: COE Type 2
[    9.044887] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
[    9.051724] dwmac-sun8i 5020000.ethernet: Normal descriptors
[    9.057399] dwmac-sun8i 5020000.ethernet: Chain mode enabled
[    9.063272] libphy: stmmac: probed
[    9.066933] mdio_bus stmmac-0: MDIO device at address 1 is missing.
[  14.803370] dwmac-sun8i 5020000.ethernet eth0: Could not attach to PHY
[  14.810256] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)