Wish List
#3
in order to have usb tethering, you need those two scripts:

pinephone-setup-usb-nework.sh:
Code:
#!/bin/sh if [ ! -e /etc/NetworkManager/system-connections/USB.nmconnection ]; then     # Create network connection     nmcli connection add con-name USB \                         ifname usb0 \                         type ethernet \                         ip4 10.66.0.1/8     # Set priorities so it doesn't take precedence over WiFi/mobile connections     nmcli connection modify USB ipv4.route-metric 1500     nmcli connection modify USB ipv4.dns-priority 150     # Share connection so it can be used for tethering     nmcli connection modify USB ipv4.method shared fi

and, pinephone-usb-gadget.sh:
Code:
#!/bin/sh CONFIGFS=/sys/kernel/config/usb_gadget/g1 USB_VENDORID="0x1D6B"  # Linux Foundation USB_PRODUCTID="0x0104" # Multifunction composite gadget USB_MANUF="Mobian Project" USB_PRODUCT="Mobian" USB_SERIAL=`cat /etc/machine-id` setup() {     # Don't do anything if the USB gadget already exists     #[ -d $CONFIGFS ] && exit 0     # Required to make a composite gadget     modprobe libcomposite     # Create all required directories     echo "Creating the USB gadget..."     mkdir -p $CONFIGFS     mkdir -p $CONFIGFS/strings/0x409     mkdir -p $CONFIGFS/configs/c.1     mkdir -p $CONFIGFS/configs/c.1/strings/0x409     # Setup IDs and strings     echo "Setting up gadget strings..."     echo $USB_VENDORID > $CONFIGFS/idVendor     echo $USB_PRODUCTID > $CONFIGFS/idProduct     echo $USB_MANUF > $CONFIGFS/strings/0x409/manufacturer     echo $USB_PRODUCT > $CONFIGFS/strings/0x409/product     echo $USB_SERIAL > $CONFIGFS/strings/0x409/serialnumber     # Create ECM (ethernet) function     echo "Adding ECM function..."     mkdir $CONFIGFS/functions/ecm.usb0     # TODO: create RNDIS function for Windows compatibility     # Create MTP using FunctionFS     # echo "Adding MTP function using FunctionFS..."     # mkdir $CONFIGFS/functions/ffs.mtp     # Create configuration     echo "Creating gadget configuration..."     echo "Ethernet" > $CONFIGFS/configs/c.1/strings/0x409/configuration     # echo "Ethernet + MTP" > $CONFIGFS/configs/c.1/strings/0x409/configuration     ln -s $CONFIGFS/functions/ecm.usb0 $CONFIGFS/configs/c.1     # ln -s $CONFIGFS/functions/ffs.mtp $CONFIGFS/configs/c.1     # Mount the MTP FunctionFS     # echo "Mounting FunctionFS..."     # mkdir -p /dev/ffs-mtp     # mount -t functionfs mtp /dev/ffs-mtp } start() {     echo "Enabling the USB gadget..."     sleep 1     UDC=`ls /sys/class/udc`     echo "$UDC" > $CONFIGFS/UDC } reset() {     echo "Removing the USB gadget..."     # Remove USB gadget     if [ -d $CONFIGFS ]; then         echo "Removing gadget configuration..."         # rm $CONFIGFS/configs/c.1/ffs.mtp         rm $CONFIGFS/configs/c.1/ecm.usb0         rmdir $CONFIGFS/configs/c.1/strings/0x409/         rmdir $CONFIGFS/configs/c.1/         # rmdir $CONFIGFS/functions/ffs.mtp         rmdir $CONFIGFS/functions/ecm.usb0         rmdir $CONFIGFS/strings/0x409/         rmdir $CONFIGFS     fi     # Unmount FunctionFS and delete its mount point     # if [ -d /dev/ffs-mtp ]; then     #    echo "Unmounting FunctionFS..."     #    umount /dev/ffs-mtp     #    rmdir /dev/ffs-mtp     #fi } case "$1" in     reset) reset ;;     setup) setup ;;     start) start ;;     *) ;; esac

then run:


Code:
sudo ./pinephone-setup-usb-nework.sh sudo ./pinephone-usb-gadget.sh reset sudo ./pinephone-usb-gadget.sh setup sudo ./pinephone-usb-gadget.sh start
  Reply


Messages In This Thread
Wish List - by CitizenZeven - 11-10-2020, 06:05 AM
RE: Wish List - by ak42 - 11-12-2020, 05:46 PM
RE: Wish List - by user12345 - 04-14-2021, 08:57 AM
RE: Wish List - by ak42 - 11-13-2020, 04:20 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)