08-31-2020, 01:48 PM
I forgot to mention that I also tried unplugging the USB to SATA bridge and doing the build using only the SD card and that didn't help either.
I just occurred to me that I could swap the power supplies to see if that makes a difference. I'll be trying that and reporting back. Any other ideas or options would be greatly appreciated.
Is there a way to increase slightly the voltage to memory or the CPU?
I just occurred to me that I could swap the power supplies to see if that makes a difference. I'll be trying that and reporting back. Any other ideas or options would be greatly appreciated.
Is there a way to increase slightly the voltage to memory or the CPU?