07-24-2020, 07:01 AM
Thanks for your help - unfortunately I'm still not having any luck with this.
I re-flashed the mobian 16/7 image, and then ran `sudo apt update && sudo apt upgrade`. There were a few issues with this process however, apt hung at some point, and I had to do a `dpkg-reconfigure -a` and then continue installing.
The red cord that I have definitely has data connections - when I booted the UT bootloader (UT is still on the internal MMC, remove SD card, hold volume up + power), the mmc drives show up on my laptop as mountable devices.
My output on the phone is different to yours,
`ip a` shows
"3: usb0: <NO_CARRIER,BROADCAST,MULTICAST,UP>" - then the rest looks the same except for "state DOWN".
This doesn't change when I connect the cable.
I also had a pmOS sd card that I booted (by accident) but the laptop seemed to immediately register that as a USB device, so I don't think there are hardware problems.
I re-flashed the mobian 16/7 image, and then ran `sudo apt update && sudo apt upgrade`. There were a few issues with this process however, apt hung at some point, and I had to do a `dpkg-reconfigure -a` and then continue installing.
The red cord that I have definitely has data connections - when I booted the UT bootloader (UT is still on the internal MMC, remove SD card, hold volume up + power), the mmc drives show up on my laptop as mountable devices.
My output on the phone is different to yours,
`ip a` shows
"3: usb0: <NO_CARRIER,BROADCAST,MULTICAST,UP>" - then the rest looks the same except for "state DOWN".
This doesn't change when I connect the cable.
I also had a pmOS sd card that I booted (by accident) but the laptop seemed to immediately register that as a USB device, so I don't think there are hardware problems.