03-16-2020, 03:33 PM
(03-16-2020, 03:22 PM)buffer Wrote: you could also just flash chosen OS to the SD card, boot up the SD card, open a terminal and run this command:
dd if=/dev/mmcblkX of=/dev/mmcblkY bs=1M
That works, but you just wasted a bit of your time because you flashed the OS to SD card, then boot to the SD card and flash itself to the eMMC for the second time.
While this tool exposes the eMMC as a mass storage (basically as a USB drive), you can connect the device to the computer and flash the image right away to the eMMC.
Find me in the forest, when I'm at my lowest. I don't really think you should continue..
HOLD YOUR BREATH.
HOLD YOUR BREATH.