PINE64   ›   PINE A64(+)   ›   Pine A64 Hardware, Accessories and POT   ›   DC Power In   ›   Power Pine64 via GPIO

Power Pine64 via GPIO
TeaPack
Pine Adept
***
Joined: Apr 2016
Posts: 30

Reputation: 3
#13
04-13-2016, 03:36 AM
(04-02-2016, 10:36 AM)Andrew2 Wrote:
(04-02-2016, 09:57 AM)HeadShot Wrote: So, can anyone tell me the max Vin for this board?

The power requirements are clearly written: 5V/2A. If you want to destroy the board feel free to inject higher voltages (5.1V maybe even 5.2V are fine, especially when powering through Micro USB since voltage drops will occur anyway)

Regarding test points please have a look at the schematic (no idea whether this has been released or not)

Well, PMIC on this board can work with max of 7V and unfortunately, microUSB is connected directly to Eulers pins, so there is danger of destroying other devices connected to microUSB port, when Pine is powered over pins...

complete schematics:
https://drive.google.com/file/d/0B0cEs0l...sp=sharing

PMIC datasheet:
https://github.com/OLIMEX/OLINUXINO/blob...t_V1.0.pdf
If I posted something helpful, please rate +
  Reply


Messages In This Thread
Power Pine64 via GPIO - by dulasu - 01-25-2016, 11:05 PM
RE: Power Pine64 via GPIO - by Opine - 01-25-2016, 11:17 PM
RE: Power Pine64 via GPIO - by 1q84 - 03-14-2016, 10:16 PM
RE: Power Pine64 via GPIO - by tllim - 03-15-2016, 09:22 AM
RE: Power Pine64 via GPIO - by dulasu - 01-26-2016, 01:02 AM
RE: Power Pine64 via GPIO - by Nilocsemliw - 01-26-2016, 11:37 AM
RE: Power Pine64 via GPIO - by Zoidiano0 - 03-15-2016, 05:34 AM
RE: Power Pine64 via GPIO - by HeadShot - 04-01-2016, 09:27 PM
RE: Power Pine64 via GPIO - by Zoidiano0 - 04-01-2016, 09:32 PM
RE: Power Pine64 via GPIO - by Andrew2 - 04-02-2016, 12:18 AM
RE: Power Pine64 via GPIO - by xmasone - 05-06-2016, 04:24 PM
RE: Power Pine64 via GPIO - by HeadShot - 04-02-2016, 09:57 AM
RE: Power Pine64 via GPIO - by Andrew2 - 04-02-2016, 10:36 AM
RE: Power Pine64 via GPIO - by TeaPack - 04-13-2016, 03:36 AM
RE: Power Pine64 via GPIO - by rahlquist - 04-13-2016, 08:22 AM
RE: Power Pine64 via GPIO - by TeaPack - 04-13-2016, 09:43 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Which Power Supply Unit for Pine64 A64 DB V1.1 2GB REV B (year 2016)? databaseprogrammer 1 3,510 07-03-2021, 01:29 AM
Last Post: tllim
Lightbulb Alternate Power DC-IN on the Euler Bus also with PI filter for batt operation MarkHaysHarris777 13 27,335 12-19-2020, 09:53 PM
Last Post: evilpete
  Once Again: Power Supply problems I guess (Pine A64+ locking up) marcelser 0 3,752 06-04-2018, 03:11 PM
Last Post: marcelser
  Power supply problems. larsen8989 5 10,269 05-03-2018, 09:01 PM
Last Post: tllim
  solar power on a Pine64 tablet Little_Johnny 11 18,127 03-20-2018, 12:01 AM
Last Post: pfeerick
  Power up HDDs c4tich 3 6,938 03-18-2017, 09:18 AM
Last Post: Luke
  Provide power in via Pi-2 header BenCranston 22 33,017 03-08-2017, 10:38 PM
Last Post: pfeerick
  any danger from using 2 power sources at same time? dkryder 3 7,618 01-20-2017, 10:45 PM
Last Post: MarkHaysHarris777
Lightbulb A Tale of Two Power Supplies - why good is good and better is best MarkHaysHarris777 9 19,906 01-07-2017, 11:59 PM
Last Post: aegrotatio
  First cable for Euler Bus power done! AVL2016 24 36,478 10-05-2016, 06:43 AM
Last Post: Ghost

Forum Jump:


Users browsing this thread: 2 Guest(s)