08-02-2019, 02:30 PM
FYI:
https://marc.info/?l=openbsd-arm&m=156114869709200&w=2
I was able to boot and have a regular tty speed (115200), now in the process of installation.
It is slightly tricky as you need to write those first on emmc, then dd minirootfs on an sdcard, boot the whole thing, install on emmc, prepare an EFI partition on it and rewrite the sd card with the firmware again, which will boot the freshly installed emmc with your EFI partition.
I will confirm/update when finished and validated, they're also working to make this SPI flashable iiuc.
hth
https://marc.info/?l=openbsd-arm&m=156114869709200&w=2
I was able to boot and have a regular tty speed (115200), now in the process of installation.
It is slightly tricky as you need to write those first on emmc, then dd minirootfs on an sdcard, boot the whole thing, install on emmc, prepare an EFI partition on it and rewrite the sd card with the firmware again, which will boot the freshly installed emmc with your EFI partition.
I will confirm/update when finished and validated, they're also working to make this SPI flashable iiuc.
hth