11-24-2018, 07:41 AM
Hi, I'm veeery happy with my ROCK64 overall and I managed to setup Nextcloud manually on it. It boots via the USB3 port. (Armbian-Stretch)
I ran into a error though, which is really ruining my day:
I wanted to set another USB Flashdrive as the cloud storage, connected on a USB2 port. It all works fine when I connect it after the ROCK64 booted.
BUT the ROCK64 woun't boot at all when a second USB drive is connected. It locks before a screen output, so I think this is not an Armbian problem.
I suspect the SPI bootloader gets confused when it can't boot from the USB2 drive and it will skip booting from the USB3 port?
What I figured out yet:
Bootdrive connected on USB3 port, Storage drive connected on a USB2 port --> bootlocks before screenoutput
Bootdrive connected to a USB2 port, Storage drive connected to the USB3 port --> it boots and works perfectly fine
Question:
Can I force the bootloader to only boot from USB3 and don't check the USB2 ports?
![[Image: rock64withusbsata.jpg]](https://img.picload.org/image/dcowpcaa/rock64withusbsata.jpg)
I ran into a error though, which is really ruining my day:
I wanted to set another USB Flashdrive as the cloud storage, connected on a USB2 port. It all works fine when I connect it after the ROCK64 booted.
BUT the ROCK64 woun't boot at all when a second USB drive is connected. It locks before a screen output, so I think this is not an Armbian problem.
I suspect the SPI bootloader gets confused when it can't boot from the USB2 drive and it will skip booting from the USB3 port?
What I figured out yet:
Bootdrive connected on USB3 port, Storage drive connected on a USB2 port --> bootlocks before screenoutput
Bootdrive connected to a USB2 port, Storage drive connected to the USB3 port --> it boots and works perfectly fine
Question:
Can I force the bootloader to only boot from USB3 and don't check the USB2 ports?
