Tool to Control Fan - fanctl

[tuxd3v]

Hello Guys,
v0.1.3 is Out,

Enjoy!


romtorwator

RockChip says max is 80, in the Data-sheet.
But is also says, that some other configurations could be done, with different thermal schemes..
I decided for the best, to limit it to 70C, in working condition.

It would do some harm to a processor working continuously above 70C..its life will be reduced.

rookieone

Thanks!

RockChip says that 80 should be max, but it depends on the working condition, there are many variables there..
In a permanent environment 80C, would be crazy, I think it would degrade your CPU life, but I am not sure..

No, 45C is ok, mine runs at 57C-58C, full throttle for more than a month, in testing..
What a beast!

I brought yesterday a new Fan( to adapt ),
I think I will drop some 2-3 degrees, at least I hope to..

amator_1

You welcome, thanks!
You could do a lot of things,
But for Other things better to do it in another tool, separately, so that it dosn't mess with Active Thermal settings.