07-31-2018, 12:40 PM
(07-31-2018, 04:55 AM)ayufan Wrote: Well, or just boot linux, remove jumper and run `rockpro64_reset_emmc.sh` to boot-up emmc.That is interesting, what does
echo fe330000.sdhci > /sys/bus/platform/drivers/sdhci-arasan/<un>bind
actually do?
In my case everything in dmesg seemed fine till 4s then
Code:
[ 4.165757] hid-generic 0003:248A:8566.0002: input: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-fe3a0000.usb-1/input1
[ 64.503086] mmc1: cqhci: timeout for tag 6
[ 64.503731] mmc1: cqhci: ============ CQHCI REGISTER DUMP ===========
[ 64.504662] mmc1: cqhci: Caps: 0x00000000 | Version: 0x00000510
[ 64.505588] mmc1: cqhci: Config: 0x00000000 | Control: 0x00000000
[ 64.506512] mmc1: cqhci: Int stat: 0x00000000 | Int enab: 0x00000000
[ 64.507438] mmc1: cqhci: Int sig: 0x00000000 | Int Coal: 0x00000000
[ 64.508362] mmc1: cqhci: TDL base: 0x00000000 | TDL up32: 0x00000000
[ 64.509286] mmc1: cqhci: Doorbell: 0x00000000 | TCN: 0x00000000
[ 64.510210] mmc1: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[ 64.511134] mmc1: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000
[ 64.512058] mmc1: cqhci: SSC2: 0x00000000 | DCMD rsp: 0x00000000
[ 64.512980] mmc1: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000
[ 64.513904] mmc1: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000
[ 64.514826] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 64.515751] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
[ 64.516675] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
[ 64.517599] mmc1: sdhci: Argument: 0x00010000 | Trn mode: 0x00000010
[ 64.518522] mmc1: sdhci: Present: 0x1fff0000 | Host ctl: 0x00000034
[ 64.519447] mmc1: sdhci: Power: 0x0000000b | Blk gap: 0x00000080
[ 64.520370] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 64.521294] mmc1: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 64.522218] mmc1: sdhci: Int enab: 0x02ff4000 | Sig enab: 0x02ff4000
[ 64.523143] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 64.524066] mmc1: sdhci: Caps: 0x44edc880 | Caps_1: 0x800020f7
[ 64.524990] mmc1: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 64.525913] mmc1: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x64201697
[ 64.526836] mmc1: sdhci: Resp[2]: 0x4e436172 | Resp[3]: 0x00880103
[ 64.527759] mmc1: sdhci: Host ctl2: 0x00000083
[ 64.528406] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7f11c208
[ 64.529326] mmc1: sdhci: ============================================
[ 64.530325] mmc1: running CQE recovery- ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
- PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
- PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
