Intel I350 T4 problem

[tvoegeli]

Hi

My RockPro64 arrived last week and it looks good so far. But I have a little problem, I tried a Intel I350 T4 4 port gigabit nic on the PCIe slot and it doesn't work...
I'm running stretch minimal from ayufan (stretch-minimal-rockpro64-0.7.8-1061-arm64). In my computer (fedora) and in my server (centos) the nic works fine.

It does show up with lspci:

Code:

tobias@rockpro64:/sys/class/net$ sudo lspci
[sudo] password for tobias:
00:00.0 PCI bridge: Device 1d87:0100
01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)

But there is no entry in the /sys/class/net folder for it and ip a doesn't show any additional ethernet ports:

Code:

tobias@rockpro64:/sys/class/net$ ls
eth0  lo

Code:

tobias@rockpro64:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
   inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
   link/ether c2:c8:5c:18:65:9e brd ff:ff:ff:ff:ff:ff
   inet 10.1.0.125/24 brd 10.1.0.255 scope global eth0
      valid_lft forever preferred_lft forever
   inet 10.1.0.124/24 brd 10.1.0.255 scope global secondary eth0
      valid_lft forever preferred_lft forever
   inet6 fe80::c0c8:5cff:fe18:659e/64 scope link
      valid_lft forever preferred_lft forever

Did anyone from you try a gigabit nic on the rockpro (maybe a I350) and how did it work or do you have any suggestions for me?

Thanks in advance and sorry for my english
Tobias