(05-31-2018, 05:08 PM)pfeerick Wrote:(05-31-2018, 01:09 PM)deeproot Wrote: I am only able to get to where the kernel complains about the memory and just shuts down. Is there anything extra todo besides just burning the images to sdcard with etcher? I was able to get android up and running with no problem.
As the rockpro64 is still brand spanking new (you can till smell the plastic), there will be problems. If you are using the right image (note the rockpro64/rock64 filenames), and it doesn't work, report the issue on github (mark it clearly as a rockpro64 issue) or here on the forum, and give whatever logs you can. For me, 0.6.44 just booted up and is running fine so far on a 4GB rockpro64. Running bionic-containers atm, but haven't had time to play around with it much other to get it booting and do a quick stress test on the cpu to see how the thermals, check the leds works, and see if docker could at least run the hello world container.
You should no needed to do anything more than burn the image to a SD card (with etcher, etc). If you have a different brand of card, try that, as it could be
How can I dump logs somewhere to show them?
https://i.imgur.com/J6CIneM.jpg
Archlinux laptop
etcher 1.44
official psu from pine64
passive heatsink from pine64
images used:
stretch-minimal-rockpro64-0.6.44-239-arm64.img
bionic-minimal-rockpro64-0.6.43-238-arm64.img
bionic-containers-rockpro64-0.6.44-239-arm64.img
sdcards used
sandisk ultra plus 16gb microsd hc(red / grey)
I did use the sandisk to boot the android image from pine64.
samsung evo 32 microsd hc(orange / white)
tried another laptop with windows and w32disk imager...same thing.
