04-23-2018, 04:08 AM
Hi Everybody!
I' received few time ago a Rock64 2G I'll like o use as media server
I'm also trying to connect GPIO to a prototyping board through a ribbon cable 28AWG 40wires (similar to the ones once used for ATA disk) but as soon as I try to connect this cable I have loads of error
the wired thing is that nothing is connected on the other side of ribbon cable when I get this error....
Thanks for any help or advice
I' received few time ago a Rock64 2G I'll like o use as media server
I'm also trying to connect GPIO to a prototyping board through a ribbon cable 28AWG 40wires (similar to the ones once used for ATA disk) but as soon as I try to connect this cable I have loads of error
Code:
Apr 23 09:19:55 rock64 kernel: [ 68.768983] mmcblk1: error -84 transferring data, sector 1723920, nr 32, cmd response 0x900, card status 0x0
Apr 23 09:19:55 rock64 kernel: [ 68.784147] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.817032] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.818136] mmc1: tried to reset card
Apr 23 09:19:55 rock64 kernel: [ 68.819089] mmcblk1: error -5 transferring data, sector 1723920, nr 32, cmd response 0x900, card status 0xb00
Apr 23 09:19:55 rock64 kernel: [ 68.820177] mmcblk1: retrying using single block read
Apr 23 09:19:55 rock64 kernel: [ 68.821655] mmcblk1: error -84 transferring data, sector 1723921, nr 31, cmd response 0x900, card status 0x0
Apr 23 09:19:55 rock64 kernel: [ 68.837149] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.870031] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.871150] mmc1: tried to reset card
Apr 23 09:19:55 rock64 kernel: [ 68.874435] mmcblk1: error -110 sending status command, retrying
Apr 23 09:19:55 rock64 kernel: [ 68.875149] mmcblk1: error -84 transferring data, sector 1723927, nr 25, cmd response 0x900, card status 0x0
Apr 23 09:19:55 rock64 kernel: [ 68.891146] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.924033] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.925152] mmc1: tried to reset card
Apr 23 09:19:55 rock64 kernel: [ 68.928530] mmcblk1: error -110 sending status command, retrying
Apr 23 09:19:55 rock64 kernel: [ 68.929225] mmcblk1: error -84 transferring data, sector 1723935, nr 17, cmd response 0x900, card status 0x0
Apr 23 09:19:55 rock64 kernel: [ 68.945150] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.978031] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 68.979163] mmc1: tried to reset card
Apr 23 09:19:55 rock64 kernel: [ 68.980039] mmcblk1: error -84 transferring data, sector 1723935, nr 17, cmd response 0x900, card status 0x0
Apr 23 09:19:55 rock64 kernel: [ 68.981151] blk_update_request: I/O error, dev mmcblk1, sector 1723935
Apr 23 09:19:55 rock64 kernel: [ 68.990404] mmcblk1: error -5 transferring data, sector 1723920, nr 8, cmd response 0x900, card status 0x0
Apr 23 09:19:55 rock64 kernel: [ 69.006146] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 69.039027] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
Apr 23 09:19:55 rock64 kernel: [ 69.040152] mmc1: tried to reset cardthe wired thing is that nothing is connected on the other side of ribbon cable when I get this error....
Thanks for any help or advice
