03-09-2018, 11:27 AM
Hi,
I'm having problems with my 2.5" 500GB WD Blue disk connected to USB 3.0 port with Startech's USB 3.1 (10Gbps) Adapter Cable for 2.5" SATA Drives
(https://www.startech.com/HDD/Adapters/us...B312SAT3CB) under heavy disk usage.
Linux version installed to rock64: Ayufan's stretch-minimal-rock64-0.5.15-136-arm64
uname -a:
Linux rockBOX 4.4.77-rockchip-ayufan-136 #1 SMP Thu Oct 12 09:14:48 UTC 2017 aarch64 GNU/Linux
(It is upgraded to stretch-minimal-rock64-0.6.25-193-arm64 today, but problems still goes on)
after boot:
After trying to extract files
and it hangs later:
I tested my disk and USB 3.0 SATA adapter on my other PCs (Arch Linux on laptop, Windows 7 & Windows 10 on desktop),
It is running perfect without any problem.
Anyone having similar problems?
I need help...
Thanks.
I'm having problems with my 2.5" 500GB WD Blue disk connected to USB 3.0 port with Startech's USB 3.1 (10Gbps) Adapter Cable for 2.5" SATA Drives
(https://www.startech.com/HDD/Adapters/us...B312SAT3CB) under heavy disk usage.
Linux version installed to rock64: Ayufan's stretch-minimal-rock64-0.5.15-136-arm64
uname -a:
Linux rockBOX 4.4.77-rockchip-ayufan-136 #1 SMP Thu Oct 12 09:14:48 UTC 2017 aarch64 GNU/Linux
(It is upgraded to stretch-minimal-rock64-0.6.25-193-arm64 today, but problems still goes on)
after boot:
Code:
[ 6.513428] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 6.520230] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d450 00000000 00000000 1b000000 01038001
[ 6.566054] sda: sda1
[ 6.574262] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.761739] random: nonblocking pool is initialized
[ 7.065293] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.751919] Adding 4194300k swap on /mnt/data/swap.file. Priority:-1 extents:5 across:4636668k
[ 9.387683] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.267894] NFSD: starting 90-second grace period (net ffffff8009286480)
[ 15.437115] tty_port_close_start: tty->count = 1 port count = 2.After trying to extract files
Code:
[ 1160.867080] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 1160.867936] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 0a b7 cd 07 00 01 00 00
[ 1160.868798] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1160.869822] xhci-hcd xhci-hcd.9.auto: @00000000f3a6ddb0 00000000 00000000 1b000000 01038001
[ 1196.825676] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 1196.826550] sd 0:0:0:0: [sda] tag#2 CDB: opcode=0x2a 2a 00 08 86 6c df 00 00 18 00
[ 1196.827424] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.828448] xhci-hcd xhci-hcd.9.auto: @00000000f3a6ddd0 00000000 00000000 1b000000 01048001
[ 1196.829399] scsi host0: uas_eh_bus_reset_handler start
[ 1196.830016] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.831037] xhci-hcd xhci-hcd.9.auto: @00000000f3a6ddf0 00000000 00000000 1b000000 01078001
[ 1196.832000] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.833018] xhci-hcd xhci-hcd.9.auto: @00000000f3a6de10 00000000 00000000 1b000000 01078001
[ 1196.833970] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.834987] xhci-hcd xhci-hcd.9.auto: @00000000f3a6de30 00000000 00000000 1b000000 01078001
[ 1196.835943] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.836958] xhci-hcd xhci-hcd.9.auto: @00000000f3a6de50 00000000 00000000 1b000000 01078001
[ 1196.837886] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.838902] xhci-hcd xhci-hcd.9.auto: @00000000f3a6de70 00000000 00000000 1b000000 01078001
[ 1196.839847] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.840864] xhci-hcd xhci-hcd.9.auto: @00000000f3a6de90 00000000 00000000 1b000000 01048001
[ 1196.841817] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1196.842830] xhci-hcd xhci-hcd.9.auto: @00000000f3a6deb0 00000000 00000000 1b000000 01048001
[ 1196.843745] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
[ 1196.844536] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
[ 1196.845351] sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD
[ 1196.846122] sd 0:0:0:0: [sda] tag#3 CDB: opcode=0x2a 2a 00 05 47 e7 0f 00 00 08 00
[ 1196.846933] sd 0:0:0:0: [sda] tag#4 uas_zap_pending 0 uas-tag 5 inflight: CMD
[ 1196.847704] sd 0:0:0:0: [sda] tag#4 CDB: opcode=0x2a 2a 00 0f bd f7 17 00 00 08 00
[ 1196.950752] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1196.963198] scsi host0: uas_eh_bus_reset_handler success
[ 1230.884233] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1230.885093] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 08 83 be 9f 00 00 08 00
[ 1230.885952] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1230.886973] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d660 00000000 00000000 1b000000 01048000
[ 1236.842345] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
[ 1236.843202] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x28 28 00 0a b9 a2 07 00 01 00 00
[ 1236.844068] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1236.845088] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d680 00000000 00000000 1b000000 01038000
[ 1236.846051] scsi host0: uas_eh_bus_reset_handler start
[ 1236.846674] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1236.847701] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d6a0 00000000 00000000 1b000000 01078000
[ 1236.848652] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1236.849661] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d6c0 00000000 00000000 1b000000 01078000
[ 1236.952435] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1236.969913] scsi host0: uas_eh_bus_reset_handler success
[ 1274.829062] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1274.835019] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 1d 05 41 af 00 00 30 00
[ 1274.842297] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1274.848302] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d990 00000000 00000000 1b000000 01048000
[ 1274.855284] sd 0:0:0:0: [sda] tag#2 unexpected response iu 10 uas-tag 1 inflight: CMD IN
[ 1274.861118] sd 0:0:0:0: [sda] tag#2 CDB: opcode=0x28 28 00 1b bc 43 d7 00 01 00 00
[ 1274.866874] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1274.872858] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d9d0 00000000 00000000 1b000000 01038000
[ 1297.883446] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 1297.889265] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x2a 2a 00 00 00 ff ff 00 00 08 00
[ 1297.895058] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1297.901005] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d9f0 00000000 00000000 1b000000 01048000
[ 1297.906843] scsi host0: uas_eh_bus_reset_handler start
[ 1297.912458] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1297.918438] xhci-hcd xhci-hcd.9.auto: @00000000f3a6da10 00000000 00000000 1b000000 01078000
[ 1297.924324] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1297.930314] xhci-hcd xhci-hcd.9.auto: @00000000f3a6da30 00000000 00000000 1b000000 01078000
[ 1298.038542] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1298.056157] scsi host0: uas_eh_bus_reset_handler success
[ 1376.854958] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
[ 1376.860801] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x28 28 00 1b bd 57 d7 00 01 00 00
[ 1376.868264] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1376.874292] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d7a0 00000000 00000000 1b000000 01038000
[ 1376.880224] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 1376.886070] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 1d 05 50 07 00 00 88 00
[ 1376.894335] scsi host0: uas_eh_bus_reset_handler start
[ 1376.899985] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1376.906067] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d7c0 00000000 00000000 1b000000 01078000
[ 1376.912106] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1376.918243] xhci-hcd xhci-hcd.9.auto: @00000000f3a6d7e0 00000000 00000000 1b000000 01078000
[ 1377.027035] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1377.045562] scsi host0: uas_eh_bus_reset_handler successand it hangs later:
Code:
Message from syslogd@rockBOX at Mar 9 20:00:23 ...
kernel:[ 1680.499560] Kernel panic - not syncing: hung_task: blocked tasks
Message from syslogd@rockBOX at Mar 9 20:00:23 ...
kernel:[ 1680.968260] Kernel Offset: disabled
Message from syslogd@rockBOX at Mar 9 20:00:23 ...
kernel:[ 1680.970737] Memory Limit: noneI tested my disk and USB 3.0 SATA adapter on my other PCs (Arch Linux on laptop, Windows 7 & Windows 10 on desktop),
It is running perfect without any problem.
Anyone having similar problems?
I need help...
Thanks.