02-05-2018, 05:33 AM
Hi,
I recently got a Rock 64 board, working fine with a Micro SD card (tested with DietPi and Debian stretch lite... No issues detected at this time !)
The problem occurs when I try to boot from the emmc module : I bought with the Rock 64 a 16G emmc Module and the USB adapter. I download the Pine64Installer to flash the emmc module with the USB adapter (debian stretch lite in the first test). No problem. Then, I install the emmc module on the Rock64, remove the micro SD and connect the power supply. It seems it cannot properly boot. I've got many error messages (I can't read anything !) and finally, get a nice :
"end Kernel panic - not syncing : Attempted to kill init!"
I thought that something was wrong in the flash process, so I tried again : same error.
I try flashing another linux (dietPi, this image works fine on micro SD) : same error.
I can access the 2 partitions created with pine64 installer (mounted from /dev/sdb6 and /dev/sdb7.... why ? I don't know)
I tried to use a simple dd command to flash again an os on the emmc module : the process gives me the same result (the 2 same partitions) but the "kernel panic" is still there !
Is there something I forgot in the process ? Any idea to resolve this ?
Thanks in advance
Yoh
I recently got a Rock 64 board, working fine with a Micro SD card (tested with DietPi and Debian stretch lite... No issues detected at this time !)
The problem occurs when I try to boot from the emmc module : I bought with the Rock 64 a 16G emmc Module and the USB adapter. I download the Pine64Installer to flash the emmc module with the USB adapter (debian stretch lite in the first test). No problem. Then, I install the emmc module on the Rock64, remove the micro SD and connect the power supply. It seems it cannot properly boot. I've got many error messages (I can't read anything !) and finally, get a nice :
"end Kernel panic - not syncing : Attempted to kill init!"
I thought that something was wrong in the flash process, so I tried again : same error.
I try flashing another linux (dietPi, this image works fine on micro SD) : same error.
I can access the 2 partitions created with pine64 installer (mounted from /dev/sdb6 and /dev/sdb7.... why ? I don't know)
I tried to use a simple dd command to flash again an os on the emmc module : the process gives me the same result (the 2 same partitions) but the "kernel panic" is still there !
Is there something I forgot in the process ? Any idea to resolve this ?
Thanks in advance
Yoh