Hi,
I'm about to order the Rock64 for a NAS project.
I'm going to build the Rock64 inside a 4bay case (like Chenbro SR30169 or similar).
I made a schematic how I thought to build it.
![[Image: 8TdCzq.png]](http://imageshack.com/a/img922/3852/8TdCzq.png)
*Edit 15-09*
After knowing i don't need a GigabitEthernet adapter i have redisgn my model :
![[Image: PQeIxw.png]](http://imageshack.com/a/img924/9206/PQeIxw.png)
for the USB3.0 to SATA (RAID) i'm thinking about this one : Oodelay USB 3.0 & eSATA 6Gb to x2 SATA 6Gbs RAID 0/1/JBOD Bridge Board (UB203RM)
for the USB2.0 to sata i'm thinking about this one : USB to IDE SATA 2.5 3.5 Hard Disk HDD Cable Converter LW
Wire'ing is no problem since i'm an elektrician
Hoop to hear your guys advice en tips
I'm about to order the Rock64 for a NAS project.
I'm going to build the Rock64 inside a 4bay case (like Chenbro SR30169 or similar).
I made a schematic how I thought to build it.
Code:
Because I'm going to use the nas most of all for internal file transfer (SAMBA) I really wanted to integrate GigaEthernet.
But I'm not sure to place the GigaEthernet adapter on a USB3.0 or USB2.0 port (and dedicate the USB3.0 port only for the USB3.0-->SATA)
*****The ethernet port on the Rock64 is already a Gigabit port ... :D*Edit 15-09*
After knowing i don't need a GigabitEthernet adapter i have redisgn my model :
for the USB3.0 to SATA (RAID) i'm thinking about this one : Oodelay USB 3.0 & eSATA 6Gb to x2 SATA 6Gbs RAID 0/1/JBOD Bridge Board (UB203RM)
for the USB2.0 to sata i'm thinking about this one : USB to IDE SATA 2.5 3.5 Hard Disk HDD Cable Converter LW
Wire'ing is no problem since i'm an elektrician
Hoop to hear your guys advice en tips
