09-06-2017, 04:48 AM
Thanks for your reply.
I already said above that the power adapter and its connector which has been powering my Raspberry Pi 2 without issues for quite awhile works only intermittently with my Pine64 board. Also, I read/write checked the last brand new Class 10 32GB card exhaustively before writing an image. The image on the new card fails intermittently on Pine64 boot. When I tested the raw disk image with a full raw device scanner afterwards, no errors are reported.
Maybe there is a faulty power connector on the board. Maybe there are bus issues somewhere on the board. In any case, it's the board. I have invested enough time on this board.
I already said above that the power adapter and its connector which has been powering my Raspberry Pi 2 without issues for quite awhile works only intermittently with my Pine64 board. Also, I read/write checked the last brand new Class 10 32GB card exhaustively before writing an image. The image on the new card fails intermittently on Pine64 boot. When I tested the raw disk image with a full raw device scanner afterwards, no errors are reported.
Maybe there is a faulty power connector on the board. Maybe there are bus issues somewhere on the board. In any case, it's the board. I have invested enough time on this board.