03-27-2017, 09:53 AM
(This post was last modified: 03-27-2017, 09:56 AM by saro.
Edit Reason: specification
)
(03-27-2017, 09:43 AM)xalius Wrote: That should be ok, I would use arecord too for testing, make sure you have the correct device...
Here the devices:
Code:
**** List of CAPTURE Hardware Devices ****
card 1: audiocodec [audiocodec], device 0: SUNXI-CODEC codec-aif1-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 1: bb Voice codec-aif2-1 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 2: bb-bt-clk codec-aif2-2 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 3: bt Voice codec-aif3-3 []
Subdevices: 1/1
Subdevice #0: subdevice #0
**** List of PLAYBACK Hardware Devices ****
card 0: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 0: SUNXI-CODEC codec-aif1-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 1: bb Voice codec-aif2-1 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 2: bb-bt-clk codec-aif2-2 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: audiocodec [audiocodec], device 3: bt Voice codec-aif3-3 []
Subdevices: 1/1
Subdevice #0: subdevice #0and the same with pactl command:
Code:
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "8.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "8.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "8.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "8.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "8.0"
Module #6
Name: module-alsa-card
Argument: device_id="1" name="platform-sound.6" card_name="alsa_card.platform-sound.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="platform-sound.7" card_name="alsa_card.platform-sound.7" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
Module #8
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "8.0"
Module #9
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "8.0"
Module #10
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "8.0"
Module #11
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "8.0"
Module #12
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "8.0"
Module #13
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "8.0"
Module #14
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "8.0"
Module #15
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "8.0"
Module #16
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "8.0"
Module #17
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "8.0"
Sink #0
State: SUSPENDED
Name: alsa_output.platform-sound.6.analog-stereo
Description: audiocodec Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.platform-sound.6.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "SUNXI-CODEC codec-aif1-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "audiocodec"
alsa.long_card_name = "audiocodec"
alsa.driver_name = "sunxi_sndcodec"
device.bus_path = "platform-sound.6"
sysfs.path = "/devices/soc.0/sound.6/sound/card1"
device.string = "hw:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "audiocodec Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Ports:
analog-output-headphones: Headphones (priority: 9000)
Active Port: analog-output-headphones
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.platform-sound.7.analog-stereo
Description: sndhdmi Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.platform-sound.7.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "SUNXI-HDMIAUDIO sndhdmi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "sndhdmi"
alsa.long_card_name = "sndhdmi"
device.bus_path = "platform-sound.7"
sysfs.path = "/devices/soc.0/sound.7/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "sndhdmi Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.platform-sound.6.analog-stereo.monitor
Description: Monitor of audiocodec Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.platform-sound.6.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of audiocodec Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "audiocodec"
alsa.long_card_name = "audiocodec"
alsa.driver_name = "sunxi_sndcodec"
device.bus_path = "platform-sound.6"
sysfs.path = "/devices/soc.0/sound.6/sound/card1"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.platform-sound.6.analog-stereo
Description: audiocodec Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "SUNXI-CODEC codec-aif1-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "audiocodec"
alsa.long_card_name = "audiocodec"
alsa.driver_name = "sunxi_sndcodec"
device.bus_path = "platform-sound.6"
sysfs.path = "/devices/soc.0/sound.6/sound/card1"
device.string = "hw:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "audiocodec Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Ports:
analog-input: Analog Input (priority: 10000)
Active Port: analog-input
Formats:
pcm
Source #2
State: SUSPENDED
Name: alsa_output.platform-sound.7.analog-stereo.monitor
Description: Monitor of sndhdmi Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.platform-sound.7.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of sndhdmi Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "sndhdmi"
alsa.long_card_name = "sndhdmi"
device.bus_path = "platform-sound.7"
sysfs.path = "/devices/soc.0/sound.7/sound/card0"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 14
Properties:
application.name = "Login Session c1"
systemd-login.session = "c1"
Client #6
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "14826"
application.process.user = "ubuntu"
application.process.host = "pine64"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = "localhost:10.0"
application.process.machine_id = "8a7eae2accb7977bad9de1e15856980a"
application.process.session_id = "c1"
Card #0
Name: alsa_card.platform-sound.6
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "1"
alsa.card_name = "audiocodec"
alsa.long_card_name = "audiocodec"
alsa.driver_name = "sunxi_sndcodec"
device.bus_path = "platform-sound.6"
sysfs.path = "/devices/soc.0/sound.6/sound/card1"
device.string = "1"
device.description = "audiocodec"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1, priority: 2, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority: 200, available: yes)
output:analog-mono+input:analog-mono: Analog Mono Duplex (sinks: 1, sources: 1, priority: 202, available: yes)
output:analog-mono+input:analog-stereo: Analog Mono Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 260, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-mono: Analog Stereo Output + Analog Mono Input (sinks: 1, sources: 1, priority: 6002, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input: Analog Input (priority: 10000, latency offset: 0 usec)
Part of profile(s): input:analog-mono, input:analog-stereo, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-mono, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo
Card #1
Name: alsa_card.platform-sound.7
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "sndhdmi"
alsa.long_card_name = "sndhdmi"
device.bus_path = "platform-sound.7"
sysfs.path = "/devices/soc.0/sound.7/sound/card0"
device.string = "0"
device.description = "sndhdmi"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Profiles:
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority: 200, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-mono, output:analog-stereoAren't these correct?
Thanks in advance for your patience.