02-19-2017, 03:29 PM
Please read this link
also
Please read this follow-on link
Your motor is a three wire brushless DC motor; which means it requires a brushless motor controller ( either 5v or 12v )
The controller might be built in, which means the third wire is a pwm input; but I seriously doubt it. One wire is ground, and the other two are both voltage or voltage and sensor; in any case, without the controller it is going to be difficult to connect the motor to the pine. On the other hand, if you can get the specs for the motor you might be able to provide the right brushless controller, or you might be able to make the pine into the controller.
In my links above I am using a two wire brushless motor and python coding to provide the controller pwm signal via 2N2222 transistor.
This is a good starting point.
also
Please read this follow-on link
Your motor is a three wire brushless DC motor; which means it requires a brushless motor controller ( either 5v or 12v )
The controller might be built in, which means the third wire is a pwm input; but I seriously doubt it. One wire is ground, and the other two are both voltage or voltage and sensor; in any case, without the controller it is going to be difficult to connect the motor to the pine. On the other hand, if you can get the specs for the motor you might be able to provide the right brushless controller, or you might be able to make the pine into the controller.
In my links above I am using a two wire brushless motor and python coding to provide the controller pwm signal via 2N2222 transistor.
This is a good starting point.
marcushh777
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )

please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )