11-29-2016, 10:51 AM
(This post was last modified: 11-29-2016, 12:04 PM by orzeu.
Edit Reason: cmd
)
Microphone does not work (audiojack).
Audio jack output works well, but input none at all.
(Has anybody else tested it?)
I use divider/switch jack cable to get input and output together:
https://i.stack.imgur.com/XDfgM.jpg
Things I've done already (as recommended ealier):
# scripts
pine64_update_kernel.sh
pine64_eth0-mackeeper.sh
pine64_fix_whatever.sh
install_mate_desktop.sh <-- this nope, using xubuntu-desktop
reboot now
# software
aptitude install alsa-base alsa-utils pulseaudio gstreamer1.0-alsa mplayer vlc
# config 1
cat <<EOF >/etc/modules-load.d/pine64-audiojack.conf
sunxi_codec
sunxi_i2s
sunxi_sndcodec
EOF
# config 2
wget https://raw.githubusercontent.com/longsl...ound.state
mv asound.state /var/lib/alsa/asound.state
# audio group
usermod -a -G audio ubuntu
usermod -a -G audio root
reboot now
There is silence when I record wav file or preview signal volume in PulseAudio Volume Control.
# ss
http://imgur.com/a/3536I
UPDATE
There is difference in 'List of capture hardware devices' (arecord -l command) when I plug microphone directly (input ONLY).
card 1: audiocodec ... SUNXI-Codec
--> Subdevices goes 0/1
It doesnt make any difference when recording anyway.
Need solution for this, please fix it,
many thanks!
Audio jack output works well, but input none at all.
(Has anybody else tested it?)
I use divider/switch jack cable to get input and output together:
https://i.stack.imgur.com/XDfgM.jpg
Things I've done already (as recommended ealier):
# scripts
pine64_update_kernel.sh
pine64_eth0-mackeeper.sh
pine64_fix_whatever.sh
install_mate_desktop.sh <-- this nope, using xubuntu-desktop
reboot now
# software
aptitude install alsa-base alsa-utils pulseaudio gstreamer1.0-alsa mplayer vlc
# config 1
cat <<EOF >/etc/modules-load.d/pine64-audiojack.conf
sunxi_codec
sunxi_i2s
sunxi_sndcodec
EOF
# config 2
wget https://raw.githubusercontent.com/longsl...ound.state
mv asound.state /var/lib/alsa/asound.state
# audio group
usermod -a -G audio ubuntu
usermod -a -G audio root
reboot now
There is silence when I record wav file or preview signal volume in PulseAudio Volume Control.
# ss
http://imgur.com/a/3536I
UPDATE
There is difference in 'List of capture hardware devices' (arecord -l command) when I plug microphone directly (input ONLY).
card 1: audiocodec ... SUNXI-Codec
--> Subdevices goes 0/1
It doesnt make any difference when recording anyway.
Need solution for this, please fix it,
many thanks!